AEG Dishwasher i50 error
i50 is identified by AEG support as wash-motor or pump malfunction. Follow the official, model-scoped checks and service boundary below.
What i50 means
AEG Dishwasher i50: wash-motor or pump malfunction. This interpretation applies to AEG dishwashers covered by the linked UK support article in United Kingdom / English.
- Model scope
- AEG dishwashers covered by the linked UK support article
- Region
- United Kingdom / English
- Verified
wash-motor or pump malfunction
Isolate the appliance when safe. stop repeated programmes, record the complete code and model number, and arrange an AEG-authorised service visit Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact AEG Dishwasher i50 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete i50 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: AEG dishwashers covered by the linked UK support article
- 3Confirm that the observed condition matches the published meaning: wash-motor or pump malfunction
- 4Published check — stop repeated programmes, record the complete code and model number, and arrange an AEG-authorised service visit
- 5Stop at the published service boundary after these actions
- 6do not add a restart or test cycle that AEG does not specify for i50
- 7Published check — Give service the i50 photo, full model and serial number, when it appeared, and the result of every published external check
- 8Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for i50
Service-safe actions
- 1stop repeated programmes, record the complete code and model number, and arrange an AEG-authorised service visit
- 2Give service the i50 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
i50 cost planning: The published load, obstruction, or restart check costs €0. A drive-system diagnosis is generally planned within €90–€220 before parts, with the component and labor quoted separately.
i50 time plan: 10–20 minutes for the permitted i50 external checks and one controlled test; professional drive diagnosis commonly takes 45–90 minutes.
Phone photo of i50, Full model and serial number, Flashlight for an external stopped-appliance inspection only, No live motor or inverter test equipment
i50 parts decision: i50 identifies wash-motor or pump malfunction. It does not alone confirm a motor, inverter, belt, bearing, rotor, wiring harness, or control board; the exact failed item must be diagnosed on the listed model family.
What not to do
- Wait for all movement to stop
- Do not rotate a powered mechanism, bypass an interlock, test inverter output, or order a motor from i50 alone
- Do not run an extra test cycle after the source tells you to stop or arrange service for i50
Preventive maintenance
- 1Follow the exact AEG maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2If i50 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does i50 identify?
AEG identifies it as wash-motor or pump malfunction.
Which action is actually supported for i50?
stop repeated programmes, record the complete code and model number, and arrange an AEG-authorised service visit; Give service the i50 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after i50?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does i50 prove which part failed?
No. It identifies “wash-motor or pump malfunction”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The i50 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.