AEG Dishwasher i80 error
i80 is identified by AEG support as dishwasher electronic fault. Follow the official, model-scoped checks and service boundary below.
What i80 means
AEG Dishwasher i80: dishwasher electronic fault. This interpretation applies to AEG dishwashers covered by the linked UK support article in United Kingdom / English.
- Model scope
- AEG dishwashers covered by the linked UK support article
- Region
- United Kingdom / English
- Verified
dishwasher electronic fault
Isolate the appliance when safe. record the code, disconnect power if the appliance behaves abnormally, and arrange authorised service Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact AEG Dishwasher i80 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete i80 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: AEG dishwashers covered by the linked UK support article
- 3Confirm that the observed condition matches the published meaning: dishwasher electronic fault
- 4Published check — record the code, disconnect power if the appliance behaves abnormally, and arrange authorised service
- 5Stop at the published service boundary after these actions
- 6do not add a restart or test cycle that AEG does not specify for i80
- 7Published check — Give service the i80 photo, full model and serial number, when it appeared, and the result of every published external check
- 8Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for i80
Service-safe actions
- 1record the code, disconnect power if the appliance behaves abnormally, and arrange authorised service
- 2Give service the i80 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
i80 cost planning: The source-listed safety check is usually €0. €90–€220 is a typical Europe planning range for diagnosis before parts; it is not AEG pricing. Ask for separate diagnosis, parts, labor, and call-out lines on the quote.
i80 time plan: 5–10 minutes to document and isolate safely; 30–90 minutes is a typical diagnostic visit before any model-specific repair.
Phone camera for the complete i80 display, Full model and serial number, Power or water isolation access as described by the official procedure
i80 parts decision: No component should be ordered from i80 alone. The documented fault area is “dishwasher electronic fault”; the technician must identify the failed model-specific part and revision.
What not to do
- Do not open fixed panels, test live circuits, bypass protection, or keep operating the appliance after an urgent stop instruction
- Do not run an extra test cycle after the source tells you to stop or arrange service for i80
Preventive maintenance
- 1Follow the exact AEG maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2If i80 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does i80 identify?
AEG identifies it as dishwasher electronic fault.
Which action is actually supported for i80?
record the code, disconnect power if the appliance behaves abnormally, and arrange authorised service; Give service the i80 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after i80?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does i80 prove which part failed?
No. It identifies “dishwasher electronic fault”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The i80 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.