AEG · Dryer · Fault guide

AEG Dryer EHO error

ErrorEHO

EHO is identified by AEG support as power-supply problem. Follow the official, model-scoped checks and service boundary below.

Quick answer

What EHO means

AEG Dryer EHO: power-supply problem. This interpretation applies to AEG tumble-dryer models covered by the linked UK support article in United Kingdom / English.

Model scope
AEG tumble-dryer models covered by the linked UK support article
Region
United Kingdom / English
Verified
✓

Primary evidence: AEG tumble-dryer EHO/EH0 support.

Open official source ↗
!
Stop and make safe

power-supply problem

Isolate the appliance when safe. check the socket with another safe appliance, never use an extension lead, and arrange qualified electrical help if the supply fault remains Do not open fixed panels or test live circuits.

Typical symptoms

01EHO is shown on the AEG dryer display, indicator, or connected app
02The published condition is: power-supply problem
03The appliance has reached the manufacturer-defined stop or service condition associated with EHO
04The important observation is when EHO appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — power-supply problem
02EHO defines a service boundary; the failed internal part still requires exact-model diagnosis
03Model boundary — apply this interpretation only to AEG tumble-dryer models covered by the linked UK support article

Safe next steps

  1. 1
    Confirm the exact AEG Dryer EHO model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete EHO display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: AEG tumble-dryer models covered by the linked UK support article
  3. 3
    Confirm that the observed condition matches the published meaning: power-supply problem
  4. 4
    Published check — check the socket with another safe appliance, never use an extension lead, and arrange qualified electrical help if the supply fault remains
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that AEG does not specify for EHO
  7. 7
    Published check — Give service the EHO photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for EHO

Service-safe actions

  1. 1
    check the socket with another safe appliance, never use an extension lead, and arrange qualified electrical help if the supply fault remains
  2. 2
    Give service the EHO photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
EHO cost planning: The source-listed safety check is usually €0. €90–€220 is a typical Europe planning range for diagnosis before parts; it is not AEG pricing. Ask for separate diagnosis, parts, labor, and call-out lines on the quote.
⏱Time for the first check
EHO time plan: 5–10 minutes to document and isolate safely; 30–90 minutes is a typical diagnostic visit before any model-specific repair.
🔧Tools
Phone camera for the complete EHO display, Full model and serial number, Power or water isolation access as described by the official procedure
▣Parts or consumables
EHO parts decision: No component should be ordered from EHO alone. The documented fault area is “power-supply problem”; the technician must identify the failed model-specific part and revision.

What not to do

  • Do not open fixed panels, test live circuits, bypass protection, or keep operating the appliance after an urgent stop instruction
  • Do not run an extra test cycle after the source tells you to stop or arrange service for EHO

Preventive maintenance

  • 1
    Follow the exact AEG maintenance schedule for the dryer and keep the model, serial number, and service history available
  • 2
    If EHO begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does EHO identify?

AEG identifies it as power-supply problem.

Which action is actually supported for EHO?

check the socket with another safe appliance, never use an extension lead, and arrange qualified electrical help if the supply fault remains; Give service the EHO photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after EHO?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does EHO prove which part failed?

No. It identifies “power-supply problem”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The EHO photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.