Bosch Dishwasher E06 error
E06 is identified by Bosch support as a dishwasher temperature or sensor condition. Follow the official, model-scoped checks and service boundary below.
What E06 means
Bosch Dishwasher E06: a dishwasher temperature or sensor condition. This interpretation applies to Bosch dishwasher models covered by the linked Bosch official error-code support page in United States / English.
- Model scope
- Bosch dishwasher models covered by the linked Bosch official error-code support page
- Region
- United States / English
- Verified
a dishwasher temperature or sensor condition
Isolate the appliance when safe. Do not infer a replacement heater from E06; record the model and arrange Bosch service if the code returns. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Bosch Dishwasher E06 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete E06 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch official error-code support page
- 3Confirm that the observed condition matches the published meaning: a dishwasher temperature or sensor condition
- 4Published check — Do not infer a replacement heater from E06
- 5Published check — record the model and arrange Bosch service if the code returns
- 6Stop at the published service boundary after these actions
- 7do not add a restart or test cycle that Bosch does not specify for E06
- 8Published check — Give service the E06 photo, full model and serial number, when it appeared, and the result of every published external check
- 9Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E06
Service-safe actions
- 1Do not infer a replacement heater from E06
- 2record the model and arrange Bosch service if the code returns
- 3Give service the E06 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
E06 cost planning: The published isolation or cooldown check costs €0. A qualified heating-system diagnosis is generally planned within €90–€220 before parts; request separate heater, sensor, wiring, labor, and call-out lines.
E06 time plan: 5–15 minutes for the E06 safety check, plus any documented cooldown; a qualified heating-system diagnosis commonly takes 30–90 minutes before repair.
Phone photo of E06, Full model and serial number, Timer for the one permitted cooldown or test interval, No live heater-circuit test equipment
E06 parts decision: E06 points to a dishwasher temperature or sensor condition, but it does not prove whether the heater, relay, sensor, wiring, circulation system, or control is responsible. Order only the exact-model part confirmed by diagnosis.
What not to do
- Do not repeat heating cycles, bypass thermal protection, test a live heater or relay, or order a heater from E06 alone
- Do not run an extra test cycle after the source tells you to stop or arrange service for E06
Preventive maintenance
- 1Follow the exact Bosch maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2If E06 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does E06 identify?
Bosch identifies it as a dishwasher temperature or sensor condition.
Which action is actually supported for E06?
Do not infer a replacement heater from E06; record the model and arrange Bosch service if the code returns; Give service the E06 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after E06?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does E06 prove which part failed?
No. It identifies “a dishwasher temperature or sensor condition”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The E06 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.