Bosch Dishwasher E14 error
E14 is identified by Bosch support as a dishwasher water-level sensor condition. Follow the official, model-scoped checks and service boundary below.
What E14 means
Bosch Dishwasher E14: a dishwasher water-level sensor condition. This interpretation applies to Bosch dishwasher models covered by the linked Bosch official error-code support page in United States / English.
- Model scope
- Bosch dishwasher models covered by the linked Bosch official error-code support page
- Region
- United States / English
- Verified
a dishwasher water-level sensor condition
Isolate the appliance when safe. Confirm the tap is open and the inlet hose is not kinked, then arrange Bosch service if E14 returns. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Bosch Dishwasher E14 model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete E14 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch official error-code support page
- 3Confirm that the observed condition matches the published meaning: a dishwasher water-level sensor condition
- 4Published check — Confirm the tap is open and the inlet hose is not kinked, then arrange Bosch service if E14 returns
- 5Stop at the published service boundary after these actions
- 6do not add a restart or test cycle that Bosch does not specify for E14
- 7Published check — Give service the E14 photo, full model and serial number, when it appeared, and the result of every published external check
- 8Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E14
Evidence-backed actions
- 1Confirm the tap is open and the inlet hose is not kinked, then arrange Bosch service if E14 returns
- 2Give service the E14 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
E14 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If E14 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Bosch pricing.
E14 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
E14 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Bosch model specification confirms the correct hose.
What not to do
- Close the water valves before disconnecting a hose
- Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
- Do not run an extra test cycle after the source tells you to stop or arrange service for E14
Preventive maintenance
- 1Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
- 2If E14 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does E14 identify?
Bosch identifies it as a dishwasher water-level sensor condition.
Which action is actually supported for E14?
Confirm the tap is open and the inlet hose is not kinked, then arrange Bosch service if E14 returns; Give service the E14 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after E14?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does E14 prove which part failed?
No. It identifies “a dishwasher water-level sensor condition”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The E14 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.