Bosch · Dishwasher · Fault guide

Bosch Dishwasher E22 error

ErrorE22

E22 is identified by Bosch support as a dishwasher filter or drainage condition. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E22 means

Bosch Dishwasher E22: a dishwasher filter or drainage condition. This interpretation applies to Bosch dishwasher models covered by the linked Bosch official error-code support page in United States / English.

Model scope
Bosch dishwasher models covered by the linked Bosch official error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official home-appliance error-code support.

Open official source ↗
✓
What the code means

a dishwasher filter or drainage condition

Isolate the appliance when safe. Switch off and unplug the appliance, clean only the user-accessible filter as the model manual shows, and arrange service if E22 returns. Do not open fixed panels or test live circuits.

Typical symptoms

01E22 is shown on the Bosch dishwasher display, indicator, or connected app
02The published condition is: a dishwasher filter or drainage condition
03The affected function behaves as described by the manufacturer while E22 is present
04The important observation is when E22 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — a dishwasher filter or drainage condition
02E22 identifies the documented condition, not a confirmed replacement part
03Model boundary — apply this interpretation only to Bosch dishwasher models covered by the linked Bosch official error-code support page

Safe next steps

  1. 1
    Confirm the exact Bosch Dishwasher E22 model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete E22 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch official error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: a dishwasher filter or drainage condition
  4. 4
    Published check — Switch off and unplug the appliance, clean only the user-accessible filter as the model manual shows, and arrange service if E22 returns
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that Bosch does not specify for E22
  7. 7
    Published check — Give service the E22 photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E22

Evidence-backed actions

  1. 1
    Switch off and unplug the appliance, clean only the user-accessible filter as the model manual shows, and arrange service if E22 returns
  2. 2
    Give service the E22 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E22 cost planning: €0 for the published external correction. If E22 returns afterward, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Bosch pricing.
⏱Time for the first check
E22 time plan: 10–25 minutes for the published external check and one controlled test.
🔧Tools
Exact Bosch model instructions, Only the ordinary hand-access items explicitly named in the published check
▣Parts or consumables
E22 parts decision: None for the first external correction. If E22 returns, select a part only after the documented “a dishwasher filter or drainage condition” condition is diagnosed on the full model.

What not to do

  • Do not improvise a component test, force a cover, or repeat the cycle after the same code returns
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E22

Preventive maintenance

  • 1
    Follow the exact Bosch maintenance schedule for the dishwasher and keep the model, serial number, and service history available
  • 2
    If E22 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E22 identify?

Bosch identifies it as a dishwasher filter or drainage condition.

Which action is actually supported for E22?

Switch off and unplug the appliance, clean only the user-accessible filter as the model manual shows, and arrange service if E22 returns; Give service the E22 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E22?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E22 prove which part failed?

No. It identifies “a dishwasher filter or drainage condition”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E22 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.