Miele · Dishwasher · Fault guide

Miele Dishwasher F18 error

ErrorF18

F18 is identified by Miele's official manual as technical water-inlet fault. Follow the exact model-scoped checks and safety boundary below.

Quick answer

What F18 means

Miele Dishwasher F18: technical water-inlet fault. This interpretation applies to Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 in United Kingdom / English.

Model scope
Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2
Region
United Kingdom / English
Verified
✓

Primary evidence: Miele official dishwasher operating instructions.

Open official source ↗
✓
What the code means

technical water-inlet fault

Isolate the appliance when safe. Switch the dishwasher off, close the stopcock, and contact Miele Customer Service; do not continue operating it if F18 returns. Do not open fixed panels or test live circuits.

Typical symptoms

01F18 is shown on the Miele dishwasher display, indicator, or connected app
02The published condition is: technical water-inlet fault
03The affected fill stage does not receive or confirm the expected water supply while F18 is active
04The important observation is when F18 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — technical water-inlet fault
02F18 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed
03Model boundary — apply this interpretation only to Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2

Safe next steps

  1. 1
    Confirm the exact Miele Dishwasher F18 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F18 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2
  3. 3
    Confirm that the observed condition matches the published meaning: technical water-inlet fault
  4. 4
    Published check — Switch the dishwasher off, close the stopcock, and contact Miele Customer Service
  5. 5
    Published check — do not continue operating it if F18 returns
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Miele does not specify for F18
  8. 8
    Published check — Give service the F18 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F18

Service-safe actions

  1. 1
    Switch the dishwasher off, close the stopcock, and contact Miele Customer Service
  2. 2
    do not continue operating it if F18 returns
  3. 3
    Give service the F18 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F18 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If F18 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Miele pricing.
⏱Time for the first check
F18 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
F18 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Miele model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F18

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    If F18 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F18 identify?

Miele identifies it as technical water-inlet fault.

Which action is actually supported for F18?

Switch the dishwasher off, close the stopcock, and contact Miele Customer Service; do not continue operating it if F18 returns; Give service the F18 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F18?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F18 prove which part failed?

No. It identifies “technical water-inlet fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F18 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.