Bosch · Dishwasher · Fault guide

Bosch Dishwasher E9240 error

ErrorE9240

E9240 is listed by Bosch support as dishwasher filter is blocked. The exact checks and component layout can vary by model and region.

Quick answer

What E9240 means

Bosch Dishwasher E9240: Dishwasher filter is blocked. This interpretation applies to Bosch dishwasher models covered by the linked Bosch US error-code support page in United States / English.

Model scope
Bosch dishwasher models covered by the linked Bosch US error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official dishwasher error-code support.

Open official source ↗
✓
What the code means

Dishwasher filter is blocked

Switch the dishwasher off before cleaning user-accessible parts. Hidden glass may be present near the filter and pump cover.

Typical symptoms

01The filter area contains standing water or heavy food debris
02Cleaning results worsen and particles may return to dishes
03The dishwasher may not drain completely

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Dishwasher filter is blocked

Safe next steps

  1. 1
    Confirm the exact Bosch Dishwasher E9240 model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete E9240 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch US error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: Dishwasher filter is blocked
  4. 4
    Confirm that the observed condition matches the published meaning: a blocked dishwasher filter
  5. 5
    Published check — Remove and wash the filter under running water with mild soap and a soft brush, then reinstall it
  6. 6
    Published check — contact Bosch if E9240 returns
  7. 7
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
  8. 8
    if E9240 remains, stop and move to exact-model diagnosis
  9. 9
    Published check — If E9240 returns after the listed action, do not repeat the same correction indefinitely
  10. 10
    Published check — continue with exact-model diagnosis

Evidence-backed actions

  1. 1
    Remove and wash the filter under running water with mild soap and a soft brush, then reinstall it
  2. 2
    contact Bosch if E9240 returns
  3. 3
    If E9240 returns after the listed action, do not repeat the same correction indefinitely
  4. 4
    continue with exact-model diagnosis
  5. 5
    If E9240 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
E9240 cost planning: €0 for the published external correction. If E9240 returns afterward, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Bosch pricing.
⏱Time for the first check
E9240 time plan: 10–25 minutes for the published external check and one controlled test.
🔧Tools
Exact Bosch model instructions, Only the ordinary hand-access items explicitly named in the published check
▣Parts or consumables
E9240 parts decision: None for the first external correction. If E9240 returns, select a part only after the documented “Dishwasher filter is blocked” condition is diagnosed on the full model.

What not to do

  • Do not improvise a component test, force a cover, or repeat the cycle after the same code returns
  • Do not turn E9240 into a parts diagnosis
  • the display identifies a condition, not a completed component test
  • Do not turn E9240 into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Follow the exact Bosch maintenance schedule for the dishwasher and keep the model, serial number, and service history available
  • 2
    If E9240 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E9240 identify?

Bosch identifies it as Dishwasher filter is blocked.

Which action is actually supported for E9240?

Remove and wash the filter under running water with mild soap and a soft brush, then reinstall it; contact Bosch if E9240 returns; If E9240 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.

What result matters after the E9240 check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does E9240 prove which part failed?

No. It identifies “Dishwasher filter is blocked”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E9240 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.