Bosch · Washing machine · Fault guide

Bosch Washing machine E25 / F25 error

ErrorE25 / F25

E25 / F25 is identified by Bosch support as a washing-machine sensor condition. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E25 / F25 means

Bosch Washing machine E25 / F25: a washing-machine sensor condition. This interpretation applies to Bosch washing machine models covered by the linked Bosch official error-code support page in United States / English.

Model scope
Bosch washing machine models covered by the linked Bosch official error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official home-appliance error-code support.

Open official source ↗
✓
What the code means

a washing-machine sensor condition

Isolate the appliance when safe. Do not open or test the sensor circuit; arrange Bosch service for the exact model. Do not open fixed panels or test live circuits.

Typical symptoms

01E25 / F25 is shown on the Bosch washing machine display, indicator, or connected app
02The published condition is: a washing-machine sensor condition
03The control cannot confirm the documented measured condition or sensor reference represented by E25 / F25
04The important observation is when E25 / F25 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — a washing-machine sensor condition
02E25 / F25 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to Bosch washing machine models covered by the linked Bosch official error-code support page

Safe next steps

  1. 1
    Confirm the exact Bosch Washing machine E25 / F25 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete E25 / F25 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch washing machine models covered by the linked Bosch official error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: a washing-machine sensor condition
  4. 4
    Published check — Do not open or test the sensor circuit
  5. 5
    Published check — arrange Bosch service for the exact model
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Bosch does not specify for E25 / F25
  8. 8
    Published check — Give service the E25 / F25 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E25 / F25

Service-safe actions

  1. 1
    Do not open or test the sensor circuit
  2. 2
    arrange Bosch service for the exact model
  3. 3
    Give service the E25 / F25 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E25 / F25 cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €90–€220 before any model-specific part is approved.
⏱Time for the first check
E25 / F25 time plan: 10–20 minutes for the documented E25 / F25 external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
🔧Tools
Photo of the complete E25 / F25 display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
▣Parts or consumables
E25 / F25 parts decision: E25 / F25 describes a washing-machine sensor condition; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.

What not to do

  • Do not bridge, heat, cool, wet, or electrically probe a sensor to clear E25 / F25
  • Do not replace a sensor until its circuit and the condition it measures have been checked
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E25 / F25

Preventive maintenance

  • 1
    Follow the exact Bosch maintenance schedule for the washing machine and keep the model, serial number, and service history available
  • 2
    If E25 / F25 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E25 / F25 identify?

Bosch identifies it as a washing-machine sensor condition.

Which action is actually supported for E25 / F25?

Do not open or test the sensor circuit; arrange Bosch service for the exact model; Give service the E25 / F25 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E25 / F25?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E25 / F25 prove which part failed?

No. It identifies “a washing-machine sensor condition”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E25 / F25 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.