Bosch · Washing machine · Fault guide

Bosch Washing machine E37 / F37 error

ErrorE37 / F37

E37 / F37 is identified by Bosch support as a washing-machine temperature-sensor condition. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E37 / F37 means

Bosch Washing machine E37 / F37: a washing-machine temperature-sensor condition. This interpretation applies to Bosch washing machine models covered by the linked Bosch official error-code support page in United States / English.

Model scope
Bosch washing machine models covered by the linked Bosch official error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official home-appliance error-code support.

Open official source ↗
✓
What the code means

a washing-machine temperature-sensor condition

Isolate the appliance when safe. Do not test the sensor or heater circuit; arrange Bosch service. Do not open fixed panels or test live circuits.

Typical symptoms

01E37 / F37 is shown on the Bosch washing machine display, indicator, or connected app
02The published condition is: a washing-machine temperature-sensor condition
03The control cannot confirm the documented measured condition or sensor reference represented by E37 / F37
04The important observation is when E37 / F37 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — a washing-machine temperature-sensor condition
02E37 / F37 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to Bosch washing machine models covered by the linked Bosch official error-code support page

Safe next steps

  1. 1
    Confirm the exact Bosch Washing machine E37 / F37 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete E37 / F37 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch washing machine models covered by the linked Bosch official error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: a washing-machine temperature-sensor condition
  4. 4
    Published check — Do not test the sensor or heater circuit
  5. 5
    Published check — arrange Bosch service
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Bosch does not specify for E37 / F37
  8. 8
    Published check — Give service the E37 / F37 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E37 / F37

Service-safe actions

  1. 1
    Do not test the sensor or heater circuit
  2. 2
    arrange Bosch service
  3. 3
    Give service the E37 / F37 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E37 / F37 cost planning: The published isolation or cooldown check costs €0. A qualified heating-system diagnosis is generally planned within €90–€220 before parts; request separate heater, sensor, wiring, labor, and call-out lines.
⏱Time for the first check
E37 / F37 time plan: 5–15 minutes for the E37 / F37 safety check, plus any documented cooldown; a qualified heating-system diagnosis commonly takes 30–90 minutes before repair.
🔧Tools
Phone photo of E37 / F37, Full model and serial number, Timer for the one permitted cooldown or test interval, No live heater-circuit test equipment
▣Parts or consumables
E37 / F37 parts decision: E37 / F37 points to a washing-machine temperature-sensor condition, but it does not prove whether the heater, relay, sensor, wiring, circulation system, or control is responsible. Order only the exact-model part confirmed by diagnosis.

What not to do

  • Do not repeat heating cycles, bypass thermal protection, test a live heater or relay, or order a heater from E37 / F37 alone
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E37 / F37

Preventive maintenance

  • 1
    Follow the exact Bosch maintenance schedule for the washing machine and keep the model, serial number, and service history available
  • 2
    If E37 / F37 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E37 / F37 identify?

Bosch identifies it as a washing-machine temperature-sensor condition.

Which action is actually supported for E37 / F37?

Do not test the sensor or heater circuit; arrange Bosch service; Give service the E37 / F37 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E37 / F37?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E37 / F37 prove which part failed?

No. It identifies “a washing-machine temperature-sensor condition”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E37 / F37 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.