Bosch · Washing machine · Fault guide

Bosch Washing machine E38 / F38 error

ErrorE38 / F38

E38 / F38 is identified by Bosch support as a washing-machine motor or control condition. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E38 / F38 means

Bosch Washing machine E38 / F38: a washing-machine motor or control condition. This interpretation applies to Bosch washing machine models covered by the linked Bosch official error-code support page in United States / English.

Model scope
Bosch washing machine models covered by the linked Bosch official error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official home-appliance error-code support.

Open official source ↗
✓
What the code means

a washing-machine motor or control condition

Isolate the appliance when safe. Stop the washer, isolate power when safe, and arrange Bosch service; do not open the motor circuit. Do not open fixed panels or test live circuits.

Typical symptoms

01E38 / F38 is shown on the Bosch washing machine display, indicator, or connected app
02The published condition is: a washing-machine motor or control condition
03The affected motor, drive, or movement function is stopped or limited while E38 / F38 is active
04The important observation is when E38 / F38 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — a washing-machine motor or control condition
02E38 / F38 identifies a drive condition but does not alone prove the motor, inverter, belt, bearing, rotor, wiring, or control failed
03Model boundary — apply this interpretation only to Bosch washing machine models covered by the linked Bosch official error-code support page

Safe next steps

  1. 1
    Confirm the exact Bosch Washing machine E38 / F38 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete E38 / F38 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch washing machine models covered by the linked Bosch official error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: a washing-machine motor or control condition
  4. 4
    Published check — Stop the washer, isolate power when safe, and arrange Bosch service
  5. 5
    Published check — do not open the motor circuit
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Bosch does not specify for E38 / F38
  8. 8
    Published check — Give service the E38 / F38 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E38 / F38

Service-safe actions

  1. 1
    Stop the washer, isolate power when safe, and arrange Bosch service
  2. 2
    do not open the motor circuit
  3. 3
    Give service the E38 / F38 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E38 / F38 cost planning: The published load, obstruction, or restart check costs €0. A drive-system diagnosis is generally planned within €90–€220 before parts, with the component and labor quoted separately.
⏱Time for the first check
E38 / F38 time plan: 10–20 minutes for the permitted E38 / F38 external checks and one controlled test; professional drive diagnosis commonly takes 45–90 minutes.
🔧Tools
Phone photo of E38 / F38, Full model and serial number, Flashlight for an external stopped-appliance inspection only, No live motor or inverter test equipment
▣Parts or consumables
E38 / F38 parts decision: E38 / F38 identifies a washing-machine motor or control condition. It does not alone confirm a motor, inverter, belt, bearing, rotor, wiring harness, or control board; the exact failed item must be diagnosed on the listed model family.

What not to do

  • Wait for all movement to stop
  • Do not rotate a powered mechanism, bypass an interlock, test inverter output, or order a motor from E38 / F38 alone
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E38 / F38

Preventive maintenance

  • 1
    Follow the exact Bosch maintenance schedule for the washing machine and keep the model, serial number, and service history available
  • 2
    If E38 / F38 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E38 / F38 identify?

Bosch identifies it as a washing-machine motor or control condition.

Which action is actually supported for E38 / F38?

Stop the washer, isolate power when safe, and arrange Bosch service; do not open the motor circuit; Give service the E38 / F38 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E38 / F38?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E38 / F38 prove which part failed?

No. It identifies “a washing-machine motor or control condition”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E38 / F38 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.