Daikin Air conditioner UA error
UA is listed in Daikin's official, model-scoped air-conditioner fault table as indoor/outdoor unit combination fault.
Reference source listed as Daikin official FTX25KMV1B / FTX35KMV1B operation manual 3P393186-11R.
Open official source ↗indoor/outdoor unit combination fault
Stop if there is smoke, a burning smell, damaged wiring, repeated breaker operation, or refrigerant leakage. Do not open fixed electrical or refrigerant panels. Record the code, switch the air conditioner off, and contact the Daikin service shop; the manual says not to repair, dismantle, reinstall, or modify the unit yourself.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Daikin Air conditioner UA model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete UA display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B
- 3Confirm that the observed condition matches the published meaning: indoor/outdoor unit combination fault
- 4Published check — Do not open fixed electrical or refrigerant panels
- 5Published check — Record the code, switch the air conditioner off, and contact the Daikin service shop
- 6Published check — the manual says not to repair, dismantle, reinstall, or modify the unit yourself
- 7Stop at the published service boundary after these actions
- 8do not add a restart or test cycle that Daikin does not specify for UA
- 9Published check — Give service the UA photo, full model and serial number, when it appeared, and the result of every published external check
- 10Stop at the published service boundary after these actions; do not add a restart or test cycle that Daikin does not specify for UA
Service-safe actions
- 1Do not open fixed electrical or refrigerant panels
- 2Record the code, switch the air conditioner off, and contact the Daikin service shop
- 3the manual says not to repair, dismantle, reinstall, or modify the unit yourself
- 4Give service the UA photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
UA cost planning: The source-listed safety check is usually €0. €140–€320 is a typical Europe planning range for diagnosis before parts; it is not Daikin pricing. Ask for separate diagnosis, parts, labor, and call-out lines on the quote.
UA time plan: 5–10 minutes to document and isolate safely; 30–90 minutes is a typical diagnostic visit before any model-specific repair.
Phone camera for the complete UA display, Full model and serial number, Power or water isolation access as described by the official procedure
UA parts decision: No component should be ordered from UA alone. The documented fault area is “indoor/outdoor unit combination fault”; the technician must identify the failed model-specific part and revision.
What not to do
- Do not open fixed panels, test live circuits, bypass protection, or keep operating the appliance after an urgent stop instruction
- Do not run an extra test cycle after the source tells you to stop or arrange service for UA
Preventive maintenance
- 1Follow the exact Daikin maintenance schedule for the air conditioner and keep the model, serial number, and service history available
- 2If UA begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does UA identify?
Daikin identifies it as indoor/outdoor unit combination fault.
Which action is actually supported for UA?
Do not open fixed electrical or refrigerant panels; Record the code, switch the air conditioner off, and contact the Daikin service shop; the manual says not to repair, dismantle, reinstall, or modify the unit yourself; Give service the UA photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after UA?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does UA prove which part failed?
No. It identifies “indoor/outdoor unit combination fault”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The UA photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.