Dyson · Air purifier · Fault guide

Dyson Air purifier HP02: No power error

ErrorHP02: No power

HP02: No power is identified by Dyson support as the HP02 does not start after connection to mains. Follow the official, model-scoped checks and service boundary below.

Quick answer

What HP02: No power means

Dyson Air purifier HP02: No power: the HP02 does not start after connection to mains. This interpretation applies to Dyson Pure Hot+Cool Link HP02 models covered by the official troubleshooting journey in United States / English.

Model scope
Dyson Pure Hot+Cool Link HP02 models covered by the official troubleshooting journey
Region
United States / English
Verified
✓

Primary evidence: Dyson official Pure Hot+Cool Link HP02 troubleshooting.

Open official source ↗
✓
What the code means

the HP02 does not start after connection to mains

Follow the exact model manual. Check the socket and cable externally, power-cycle once, and stop using the machine if there is cable, plug, or housing damage. Do not open fixed panels or test live circuits.

Typical symptoms

01HP02: No power is shown on the Dyson air purifier display, indicator, or connected app
02The published condition is: the HP02 does not start after connection to mains
03The appliance reports the documented supply, interruption, wiring, or power-restoration condition
04The important observation is when HP02: No power appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the HP02 does not start after connection to mains
02HP02: No power does not alone locate the fault in the outlet, breaker, cord, installation wiring, appliance wiring, or control
03Model boundary — apply this interpretation only to Dyson Pure Hot+Cool Link HP02 models covered by the official troubleshooting journey

Safe next steps

  1. 1
    Confirm the exact Dyson Air purifier HP02: No power model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete HP02: No power display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Dyson Pure Hot+Cool Link HP02 models covered by the official troubleshooting journey
  3. 3
    Confirm that the observed condition matches the published meaning: the HP02 does not start after connection to mains
  4. 4
    Published check — Check the socket and cable externally, power-cycle once, and stop using the machine if there is cable, plug, or housing damage
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that Dyson does not specify for HP02: No power
  7. 7
    Published check — Give service the HP02: No power photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for HP02: No power

Evidence-backed actions

  1. 1
    Check the socket and cable externally, power-cycle once, and stop using the machine if there is cable, plug, or housing damage
  2. 2
    Give service the HP02: No power photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
HP02: No power cost planning: €0 for the published breaker, plug, or power-restoration check. If the household supply or appliance wiring needs diagnosis, €60–€140 is a typical Europe planning range for diagnosis before parts; it is not Dyson pricing.
⏱Time for the first check
HP02: No power time plan: 5–15 minutes to document HP02: No power and complete the published power check; allow 30–90 minutes for a qualified supply or appliance diagnosis.
🔧Tools
Phone photo of the complete HP02: No power display, Full model and serial number, Access to the household breaker or plug only as the official instructions permit, No live-voltage test equipment for an owner check
▣Parts or consumables
HP02: No power parts decision: HP02: No power documents the HP02 does not start after connection to mains. It does not by itself distinguish the appliance, cord, outlet, breaker, or installation wiring as the failed item; a qualified electrical check must locate the fault before parts are ordered.

What not to do

  • Do not use an extension lead, bypass a tripping breaker, open a plug or control enclosure, or measure live mains voltage
  • Stop immediately if HP02: No power follows heat, arcing, smoke, or a burning smell
  • Do not run an extra test cycle after the source tells you to stop or arrange service for HP02: No power

Preventive maintenance

  • 1
    Follow the exact Dyson maintenance schedule for the air purifier and keep the model, serial number, and service history available
  • 2
    If HP02: No power begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does HP02: No power identify?

Dyson identifies it as the HP02 does not start after connection to mains.

Which action is actually supported for HP02: No power?

Check the socket and cable externally, power-cycle once, and stop using the machine if there is cable, plug, or housing damage; Give service the HP02: No power photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after HP02: No power?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does HP02: No power prove which part failed?

No. It identifies “the HP02 does not start after connection to mains”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The HP02: No power photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.