Dyson · Air purifier · Fault guide

Dyson Air purifier HP04: Heating not working error

ErrorHP04: Heating not working

HP04: Heating not working is identified by Dyson support as the purifier is not producing the selected heat. Follow the official, model-scoped checks and service boundary below.

Quick answer

What HP04: Heating not working means

Dyson Air purifier HP04: Heating not working: the purifier is not producing the selected heat. This interpretation applies to Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey in United States / English.

Model scope
Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey
Region
United States / English
Verified
✓

Primary evidence: Dyson official Pure Hot+Cool HP04 troubleshooting.

Open official source ↗
✓
What the code means

the purifier is not producing the selected heat

Follow the exact model manual. Confirm the temperature is set above room temperature, check the filter and inlet, and stop the test if the machine overheats or displays a fault. Do not open fixed panels or test live circuits.

Typical symptoms

01HP04: Heating not working is shown on the Dyson air purifier display, indicator, or connected app
02The published condition is: the purifier is not producing the selected heat
03The affected fill stage does not receive or confirm the expected water supply while HP04: Heating not working is active
04The important observation is when HP04: Heating not working appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the purifier is not producing the selected heat
02HP04: Heating not working does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed
03Model boundary — apply this interpretation only to Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey

Safe next steps

  1. 1
    Confirm the exact Dyson Air purifier HP04: Heating not working model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete HP04: Heating not working display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey
  3. 3
    Confirm that the observed condition matches the published meaning: the purifier is not producing the selected heat
  4. 4
    Published check — Confirm the temperature is set above room temperature, check the filter and inlet, and stop the test if the machine overheats or displays a fault
  5. 5
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
  6. 6
    if HP04: Heating not working remains, stop and move to exact-model diagnosis
  7. 7
    Published check — If HP04: Heating not working returns after the listed action, do not repeat the same correction indefinitely
  8. 8
    Published check — continue with exact-model diagnosis
  9. 9
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if HP04: Heating not working remains, stop and move to exact-model diagnosis

Evidence-backed actions

  1. 1
    Confirm the temperature is set above room temperature, check the filter and inlet, and stop the test if the machine overheats or displays a fault
  2. 2
    If HP04: Heating not working returns after the listed action, do not repeat the same correction indefinitely
  3. 3
    continue with exact-model diagnosis
  4. 4
    If HP04: Heating not working returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
HP04: Heating not working cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If HP04: Heating not working returns with normal supply, €60–€140 is a typical Europe planning range for diagnosis before parts; it is not Dyson pricing.
⏱Time for the first check
HP04: Heating not working time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
HP04: Heating not working parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Dyson model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not turn HP04: Heating not working into a parts diagnosis
  • the display identifies a condition, not a completed component test
  • Do not turn HP04: Heating not working into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    If HP04: Heating not working begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does HP04: Heating not working identify?

Dyson identifies it as the purifier is not producing the selected heat.

Which action is actually supported for HP04: Heating not working?

Confirm the temperature is set above room temperature, check the filter and inlet, and stop the test if the machine overheats or displays a fault; If HP04: Heating not working returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.

What result matters after the HP04: Heating not working check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does HP04: Heating not working prove which part failed?

No. It identifies “the purifier is not producing the selected heat”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The HP04: Heating not working photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.