Dyson · Air purifier · Fault guide

Dyson Air purifier HP04: No power error

ErrorHP04: No power

HP04: No power is identified by Dyson support as the purifier is not receiving or accepting power. Follow the official, model-scoped checks and service boundary below.

Quick answer

What HP04: No power means

Dyson Air purifier HP04: No power: the purifier is not receiving or accepting power. This interpretation applies to Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey in United States / English.

Model scope
Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey
Region
United States / English
Verified
✓

Primary evidence: Dyson official Pure Hot+Cool HP04 troubleshooting.

Open official source ↗
✓
What the code means

the purifier is not receiving or accepting power

Follow the exact model manual. Check the socket and cable for visible damage, isolate the machine, reconnect once, and stop using it if the cable or plug is damaged. Do not open fixed panels or test live circuits.

Typical symptoms

01HP04: No power is shown on the Dyson air purifier display, indicator, or connected app
02The published condition is: the purifier is not receiving or accepting power
03The affected function behaves as described by the manufacturer while HP04: No power is present
04The important observation is when HP04: No power appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the purifier is not receiving or accepting power
02HP04: No power identifies the documented condition, not a confirmed replacement part
03Model boundary — apply this interpretation only to Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey

Safe next steps

  1. 1
    Confirm the exact Dyson Air purifier HP04: No power model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete HP04: No power display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Dyson Pure Hot+Cool HP04 purifying heater and fan models covered by the official US troubleshooting journey
  3. 3
    Confirm that the observed condition matches the published meaning: the purifier is not receiving or accepting power
  4. 4
    Published check — Check the socket and cable for visible damage, isolate the machine, reconnect once, and stop using it if the cable or plug is damaged
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that Dyson does not specify for HP04: No power
  7. 7
    Published check — Give service the HP04: No power photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Dyson does not specify for HP04: No power

Evidence-backed actions

  1. 1
    Check the socket and cable for visible damage, isolate the machine, reconnect once, and stop using it if the cable or plug is damaged
  2. 2
    Give service the HP04: No power photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
HP04: No power cost planning: €0 for the published external correction. If HP04: No power returns afterward, €60–€140 is a typical Europe planning range for diagnosis before parts; it is not Dyson pricing.
⏱Time for the first check
HP04: No power time plan: 10–25 minutes for the published external check and one controlled test.
🔧Tools
Exact Dyson model instructions, Only the ordinary hand-access items explicitly named in the published check
▣Parts or consumables
HP04: No power parts decision: None for the first external correction. If HP04: No power returns, select a part only after the documented “the purifier is not receiving or accepting power” condition is diagnosed on the full model.

What not to do

  • Do not improvise a component test, force a cover, or repeat the cycle after the same code returns
  • Do not run an extra test cycle after the source tells you to stop or arrange service for HP04: No power

Preventive maintenance

  • 1
    Follow the exact Dyson maintenance schedule for the air purifier and keep the model, serial number, and service history available
  • 2
    If HP04: No power begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does HP04: No power identify?

Dyson identifies it as the purifier is not receiving or accepting power.

Which action is actually supported for HP04: No power?

Check the socket and cable for visible damage, isolate the machine, reconnect once, and stop using it if the cable or plug is damaged; Give service the HP04: No power photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after HP04: No power?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does HP04: No power prove which part failed?

No. It identifies “the purifier is not receiving or accepting power”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The HP04: No power photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.