Dyson · Air purifier · Fault guide

Dyson Air purifier TP04: No airflow error

ErrorTP04: No airflow

TP04: No airflow is identified by Dyson support as the fan produces little or no airflow. Follow the official, model-scoped checks and service boundary below.

Quick answer

What TP04: No airflow means

Dyson Air purifier TP04: No airflow: the fan produces little or no airflow. This interpretation applies to Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey in United States / English.

Model scope
Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey
Region
United States / English
Verified
✓

Primary evidence: Dyson official Pure Cool TP04 troubleshooting.

Open official source ↗
✓
What the code means

the fan produces little or no airflow

Isolate the appliance when safe. Switch off, inspect the filter and external inlet, refit the correct filter, and contact Dyson if the fan still does not deliver airflow. Do not open fixed panels or test live circuits.

Typical symptoms

01TP04: No airflow is shown on the Dyson air purifier display, indicator, or connected app
02The published condition is: the fan produces little or no airflow
03The affected fill stage does not receive or confirm the expected water supply while TP04: No airflow is active
04The important observation is when TP04: No airflow appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the fan produces little or no airflow
02TP04: No airflow does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed
03Model boundary — apply this interpretation only to Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey

Safe next steps

  1. 1
    Confirm the exact Dyson Air purifier TP04: No airflow model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete TP04: No airflow display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Dyson Pure Cool TP04 purifier models covered by the official US troubleshooting journey
  3. 3
    Confirm that the observed condition matches the published meaning: the fan produces little or no airflow
  4. 4
    Published check — Switch off, inspect the filter and external inlet, refit the correct filter, and contact Dyson if the fan still does not deliver airflow
  5. 5
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
  6. 6
    if TP04: No airflow remains, stop and move to exact-model diagnosis
  7. 7
    Published check — If TP04: No airflow returns after the listed action, do not repeat the same correction indefinitely
  8. 8
    Published check — continue with exact-model diagnosis
  9. 9
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if TP04: No airflow remains, stop and move to exact-model diagnosis

Service-safe actions

  1. 1
    Switch off, inspect the filter and external inlet, refit the correct filter, and contact Dyson if the fan still does not deliver airflow
  2. 2
    If TP04: No airflow returns after the listed action, do not repeat the same correction indefinitely
  3. 3
    continue with exact-model diagnosis
  4. 4
    If TP04: No airflow returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
TP04: No airflow cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If TP04: No airflow returns with normal supply, €60–€140 is a typical Europe planning range for diagnosis before parts; it is not Dyson pricing.
⏱Time for the first check
TP04: No airflow time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
TP04: No airflow parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Dyson model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not turn TP04: No airflow into a parts diagnosis
  • the display identifies a condition, not a completed component test
  • Do not turn TP04: No airflow into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    If TP04: No airflow begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does TP04: No airflow identify?

Dyson identifies it as the fan produces little or no airflow.

Which action is actually supported for TP04: No airflow?

Switch off, inspect the filter and external inlet, refit the correct filter, and contact Dyson if the fan still does not deliver airflow; If TP04: No airflow returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.

What result matters after the TP04: No airflow check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does TP04: No airflow prove which part failed?

No. It identifies “the fan produces little or no airflow”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The TP04: No airflow photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.