Electrolux Dishwasher LOC error
LOC is identified by Electrolux support as the dishwasher door is locked. Follow the official, model-scoped checks and service boundary below.
What LOC means
Electrolux Dishwasher LOC: the dishwasher door is locked. This interpretation applies to Electrolux US dishwashers covered by the linked official error-code and alarm guide in United States / English.
- Model scope
- Electrolux US dishwashers covered by the linked official error-code and alarm guide
- Region
- United States / English
- Verified
the dishwasher door is locked
Follow the exact model manual. check the door-latch state and arrange service if the door cannot be opened or latched correctly Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Electrolux Dishwasher LOC model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete LOC display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide
- 3Confirm that the observed condition matches the published meaning: the dishwasher door is locked
- 4Published check — check the door-latch state and arrange service if the door cannot be opened or latched correctly
- 5Stop at the published service boundary after these actions
- 6do not add a restart or test cycle that Electrolux does not specify for LOC
- 7Published check — Give service the LOC photo, full model and serial number, when it appeared, and the result of every published external check
- 8Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for LOC
Evidence-backed actions
- 1check the door-latch state and arrange service if the door cannot be opened or latched correctly
- 2Give service the LOC photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
LOC cost planning: €0 for cleaning and reseating checks; a confirmed latch or seal commonly costs €20–€100 before labor. If LOC remains, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Electrolux pricing.
LOC time plan: 5–15 minutes for an external closure check and one controlled start attempt.
Flashlight, Soft cloth for the user-accessible seal and latch area, No tool for forcing the lock
LOC parts decision: None until obstruction, loading, and seal position are excluded. A latch, lock, or seal must be confirmed against the full Electrolux model before ordering.
What not to do
- Do not slam the door or lid, force the latch, bypass the interlock, or test the lock with power connected
- Do not run an extra test cycle after the source tells you to stop or arrange service for LOC
Preventive maintenance
- 1Keep the seal and latch area clean, remove trapped items before closing, and never use the door or lid to compress an oversized load
- 2If LOC begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does LOC identify?
Electrolux identifies it as the dishwasher door is locked.
Which action is actually supported for LOC?
check the door-latch state and arrange service if the door cannot be opened or latched correctly; Give service the LOC photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after LOC?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does LOC prove which part failed?
No. It identifies “the dishwasher door is locked”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The LOC photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.