Electrolux · Dishwasher · Status guide

Electrolux Dishwasher HO error

IndicatorHO

HO is identified by Electrolux support as heater-on mode is active. Follow the official, model-scoped checks and service boundary below.

Quick answer

What HO means

Electrolux Dishwasher HO: heater-on mode is active. This interpretation applies to Electrolux US dishwashers covered by the linked official error-code and alarm guide in United States / English.

Model scope
Electrolux US dishwashers covered by the linked official error-code and alarm guide
Region
United States / English
Verified
✓

Primary evidence: Electrolux US dishwasher error-code and alarm guide.

Open official source ↗
✓
What the code means

heater-on mode is active

Follow the exact model manual. allow the dishwasher to complete the heating phase and arrange service if the display does not clear Do not open fixed panels or test live circuits.

Typical symptoms

01HO is shown on the Electrolux dishwasher display, indicator, or connected app
02The published condition is: heater-on mode is active
03The controls show the documented lock, pause, or setting state until the exact published control action is completed
04If operation no longer matches that description, record the new symptom instead of treating the normal HO state as the diagnosis

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — heater-on mode is active
02HO does not prove a failed control board while the documented control state is active
03Model boundary — apply this interpretation only to Electrolux US dishwashers covered by the linked official error-code and alarm guide

Safe next steps

  1. 1
    Confirm the exact Electrolux Dishwasher HO model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete HO display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide
  3. 3
    Confirm that the observed condition matches the published meaning: heater-on mode is active
  4. 4
    Published check — allow the dishwasher to complete the heating phase and arrange service if the display does not clear
  5. 5
    Treat HO as normal only while the observed operation matches “heater-on mode is active”
  6. 6
    a different symptom needs separate diagnosis
  7. 7
    Published check — No component repair is indicated while HO remains the documented status “heater-on mode is active”
  8. 8
    Treat HO as normal only while the observed operation matches “heater-on mode is active”; a different symptom needs separate diagnosis

What to do

  1. 1
    allow the dishwasher to complete the heating phase and arrange service if the display does not clear
  2. 2
    No component repair is indicated while HO remains the documented status “heater-on mode is active”

Action details

€Cost for the first check
HO cost planning: €0 for the control or setting correction. If the controls remain unresponsive afterward, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Electrolux pricing.
⏱Time for the first check
HO time plan: 1–5 minutes for the control sequence and one response check.
🔧Tools
No tools required, Use the exact-model control labels shown in the official instructions
▣Parts or consumables
HO parts decision: None for the published HO control procedure.

What not to do

  • Do not force a key, pry up the control panel, or repeat the key sequence rapidly if the display does not respond
  • Do not order a part or interrupt normal operation solely because HO is displayed

Preventive maintenance

  • 1
    Learn the model's normal indicators and control-lock sequence so a status message is not mistaken for a hardware fault
  • 2
    Record a change in behavior rather than treating the normal HO state itself as a maintenance fault

Frequently asked questions

What exactly does HO identify?

Electrolux identifies it as heater-on mode is active.

Which action is actually supported for HO?

allow the dishwasher to complete the heating phase and arrange service if the display does not clear; No component repair is indicated while HO remains the documented status “heater-on mode is active”.

Can I run another test after HO?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does HO prove which part failed?

No. It identifies “heater-on mode is active”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The HO photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.