GE Appliances Dishwasher PF error
PF is identified by GE Appliances' official support as power to the dishwasher was interrupted. Follow the model-scoped checks and service boundary below.
What PF means
GE Appliances Dishwasher PF: power to the dishwasher was interrupted. This interpretation applies to GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model in United States / English.
- Model scope
- GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model
- Region
- United States / English
- Verified
power to the dishwasher was interrupted
Select the desired cycle and options, press Start, and monitor one cycle; contact service if PF returns without a household power interruption. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact GE Appliances Dishwasher PF model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete PF display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article; not every code appears on every model
- 3Confirm that the observed condition matches the published meaning: power to the dishwasher was interrupted
- 4Confirm that the full model number is covered by this scope: GE Appliances dishwasher models covered by the official Dishwasher fault-code article
- 5not every code appears on every model
- 6Published check — Select the desired cycle and options, press Start, and monitor one cycle
- 7Published check — contact service if PF returns without a household power interruption
- 8Stop at the published service boundary after these actions
- 9do not add a restart or test cycle that GE Appliances does not specify for PF
- 10Published check — Give service the PF photo, full model and serial number, when it appeared, and the result of every published external check
Evidence-backed actions
- 1Select the desired cycle and options, press Start, and monitor one cycle
- 2contact service if PF returns without a household power interruption
- 3Give service the PF photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
PF cost planning: €0 for the published breaker, plug, or power-restoration check. If the household supply or appliance wiring needs diagnosis, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not GE Appliances pricing.
PF time plan: 5–15 minutes to document PF and complete the published power check; allow 30–90 minutes for a qualified supply or appliance diagnosis.
Phone photo of the complete PF display, Full model and serial number, Access to the household breaker or plug only as the official instructions permit, No live-voltage test equipment for an owner check
PF parts decision: PF documents power to the dishwasher was interrupted. It does not by itself distinguish the appliance, cord, outlet, breaker, or installation wiring as the failed item; a qualified electrical check must locate the fault before parts are ordered.
What not to do
- Do not use an extension lead, bypass a tripping breaker, open a plug or control enclosure, or measure live mains voltage
- Stop immediately if PF follows heat, arcing, smoke, or a burning smell
- Do not run an extra test cycle after the source tells you to stop or arrange service for PF
Preventive maintenance
- 1Follow the exact GE Appliances maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2If PF begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does PF identify?
GE Appliances identifies it as power to the dishwasher was interrupted.
Which action is actually supported for PF?
Select the desired cycle and options, press Start, and monitor one cycle; contact service if PF returns without a household power interruption; Give service the PF photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after PF?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does PF prove which part failed?
No. It identifies “power to the dishwasher was interrupted”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The PF photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.