GE Appliances Washer/dryer combo 353 / F353 error
353 / F353 is identified by GE Appliances' official support as the lint filter is clogged with residue. Follow the model-scoped checks and service boundary below.
What 353 / F353 means
GE Appliances Washer/dryer combo 353 / F353: the lint filter is clogged with residue. This interpretation applies to GE Profile UltraFast Combo washer/dryer models covered by the linked official fault-code article in United States / English.
- Model scope
- GE Profile UltraFast Combo washer/dryer models covered by the linked official fault-code article
- Region
- United States / English
- Verified
Primary evidence: GE Profile UltraFast Combo washer/dryer fault-code support.
Open official source ↗the lint filter is clogged with residue
Remove and wash the dual-stage lint filter as GE describes, reinstall it, and run one wash-and-dry test; contact service if the code returns. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact GE Appliances Washer/dryer combo 353 / F353 model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete 353 / F353 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: GE Profile UltraFast Combo washer/dryer models covered by the linked official fault-code article
- 3Confirm that the observed condition matches the published meaning: the lint filter is clogged with residue
- 4Published check — Remove and wash the dual-stage lint filter as GE describes, reinstall it, and run one wash-and-dry test
- 5Published check — contact service if the code returns
- 6Stop at the published service boundary after these actions
- 7do not add a restart or test cycle that GE Appliances does not specify for 353 / F353
- 8Published check — Give service the 353 / F353 photo, full model and serial number, when it appeared, and the result of every published external check
- 9Stop at the published service boundary after these actions; do not add a restart or test cycle that GE Appliances does not specify for 353 / F353
Evidence-backed actions
- 1Remove and wash the dual-stage lint filter as GE describes, reinstall it, and run one wash-and-dry test
- 2contact service if the code returns
- 3Give service the 353 / F353 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
353 / F353 cost planning: €0 for cleaning; a model-specific filter commonly costs €15–€80. If airflow remains restricted after accessible cleaning, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not GE Appliances pricing.
353 / F353 time plan: 10–25 minutes for filter and visible airflow-path cleaning plus one controlled test.
Household gloves, Soft brush or vacuum crevice tool for dry, user-accessible lint or vent areas, Flashlight
353 / F353 parts decision: Clean and refit the existing user-accessible filter first. Replace it only if damaged or if the exact GE Appliances instructions specify a replacement interval.
What not to do
- Do not operate without the filter, push debris deeper into a duct, use a wet filter unless the manual explicitly allows washing, or open fixed panels
- Do not run an extra test cycle after the source tells you to stop or arrange service for 353 / F353
Preventive maintenance
- 1Clean the user-accessible filter and visible airflow path at the interval in the exact-model manual
- 2replace damaged filters rather than operating without them
- 3If 353 / F353 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does 353 / F353 identify?
GE Appliances identifies it as the lint filter is clogged with residue.
Which action is actually supported for 353 / F353?
Remove and wash the dual-stage lint filter as GE describes, reinstall it, and run one wash-and-dry test; contact service if the code returns; Give service the 353 / F353 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after 353 / F353?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does 353 / F353 prove which part failed?
No. It identifies “the lint filter is clogged with residue”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The 353 / F353 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.