Gorenje dishwasher F67 error
Gorenje uses F67 for a water-inlet fault. Check the water tap and external inlet-hose filter safely, then use service if the code persists.
What F67 means
Gorenje Dishwasher F67: The dishwasher has detected a water-inlet problem. This interpretation applies to Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en in Europe / English manual.
- Model scope
- Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en
- Region
- Europe / English manual
- Verified
The dishwasher has detected a water-inlet problem
Close the water tap and unplug the dishwasher before touching the inlet hose or filter. Check the connection for leaks before one controlled test.
Typical symptoms
Likely causes
Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.
Safe next steps
- 1Confirm the exact Gorenje Dishwasher F67 model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete F67 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en
- 3Confirm that the observed condition matches the published meaning: The dishwasher has detected a water-inlet problem
- 4Confirm F67 and record the exact model
- 5Close the water tap and unplug the dishwasher
- 6Check the tap and visible inlet hose for a kink or leak
- 7Clean the external inlet-hose filter as the manual shows
- 8Reconnect, reopen the tap, check for watertightness, and test once
- 9Published check — Correct a closed tap or visible inlet restriction and clean the external filter
- 10Published check — A recurring F67 needs service
Evidence-backed actions
- 1Correct a closed tap or visible inlet restriction and clean the external filter
- 2A recurring F67 needs service
- 3do not select a valve or control part from the code alone
- 4If F67 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis
Repair planning
F67 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If F67 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Gorenje pricing.
F67 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
F67 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Gorenje model specification confirms the correct hose.
What not to do
- Close the water valves before disconnecting a hose
- Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
- Do not remove a pressurised hose, work on live electrical parts, force the filter, or keep running with a leaking inlet connection
- Do not turn F67 into a parts diagnosis; the display identifies a condition, not a completed component test
Preventive maintenance
- 1Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
- 2Keep the inlet filter clean and inspect the hose after any dishwasher movement or installation work
- 3If F67 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does F67 identify?
Gorenje identifies it as The dishwasher has detected a water-inlet problem.
Which action is actually supported for F67?
Correct a closed tap or visible inlet restriction and clean the external filter; A recurring F67 needs service; do not select a valve or control part from the code alone.
What result matters after the F67 check?
Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.
Does F67 prove which part failed?
No. It identifies “The dishwasher has detected a water-inlet problem”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The F67 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.