Gorenje · Washing machine · Fault guide

Gorenje Washing machine E01 error

ErrorE01

E01 is identified by Gorenje support as a washing-machine temperature-sensor error. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E01 means

Gorenje Washing machine E01: a washing-machine temperature-sensor error. This interpretation applies to Gorenje washing-machine models covered by official manual 904001en in Europe / English manual.

Model scope
Gorenje washing-machine models covered by official manual 904001en
Region
Europe / English manual
Verified
✓

Primary evidence: Gorenje official washing-machine manual 904001en.

Open official source ↗
✓
What the code means

a washing-machine temperature-sensor error

Isolate the appliance when safe. Confirm the inlet water is not abnormally cold and repeat the programme once; if E01 returns, contact an authorised Gorenje service centre. Do not open fixed panels or test live circuits.

Typical symptoms

01E01 is shown on the Gorenje washing machine display, indicator, or connected app
02The published condition is: a washing-machine temperature-sensor error
03The control cannot confirm the documented measured condition or sensor reference represented by E01
04The important observation is when E01 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — a washing-machine temperature-sensor error
02E01 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to Gorenje washing-machine models covered by official manual 904001en

Safe next steps

  1. 1
    Confirm the exact Gorenje Washing machine E01 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete E01 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Gorenje washing-machine models covered by official manual 904001en
  3. 3
    Confirm that the observed condition matches the published meaning: a washing-machine temperature-sensor error
  4. 4
    Published check — Confirm the inlet water is not abnormally cold and repeat the programme once
  5. 5
    Published check — if E01 returns, contact an authorised Gorenje service centre
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Gorenje does not specify for E01
  8. 8
    Published check — Give service the E01 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Gorenje does not specify for E01

Service-safe actions

  1. 1
    Confirm the inlet water is not abnormally cold and repeat the programme once
  2. 2
    if E01 returns, contact an authorised Gorenje service centre
  3. 3
    Give service the E01 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E01 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If E01 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Gorenje pricing.
⏱Time for the first check
E01 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
E01 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Gorenje model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E01

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    If E01 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E01 identify?

Gorenje identifies it as a washing-machine temperature-sensor error.

Which action is actually supported for E01?

Confirm the inlet water is not abnormally cold and repeat the programme once; if E01 returns, contact an authorised Gorenje service centre; Give service the E01 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E01?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E01 prove which part failed?

No. It identifies “a washing-machine temperature-sensor error”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E01 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.