LG Refrigerator dr error
dr is identified by LG support as automatic-door motor did not reach its position. Follow the official, model-scoped checks and service boundary below.
What dr means
LG Refrigerator dr: automatic-door motor did not reach its position. This interpretation applies to LG refrigerator models covered by the linked US refrigerator error-code article in United States / English.
- Model scope
- LG refrigerator models covered by the linked US refrigerator error-code article
- Region
- United States / English
- Verified
automatic-door motor did not reach its position
Isolate the appliance when safe. Keep hands clear of the automatic door mechanism and contact LG repair service for the exact model. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact LG Refrigerator dr model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete dr display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: LG refrigerator models covered by the linked US refrigerator error-code article
- 3Confirm that the observed condition matches the published meaning: automatic-door motor did not reach its position
- 4Published check — Keep hands clear of the automatic door mechanism and contact LG repair service for the exact model
- 5Stop at the published service boundary after these actions
- 6do not add a restart or test cycle that LG does not specify for dr
- 7Published check — Give service the dr photo, full model and serial number, when it appeared, and the result of every published external check
- 8Stop at the published service boundary after these actions; do not add a restart or test cycle that LG does not specify for dr
Service-safe actions
- 1Keep hands clear of the automatic door mechanism and contact LG repair service for the exact model
- 2Give service the dr photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
dr cost planning: €0 for cleaning and reseating checks; a confirmed latch or seal commonly costs €20–€100 before labor. If dr remains, €110–€250 is a typical Europe planning range for diagnosis before parts; it is not LG pricing.
dr time plan: 5–15 minutes for an external closure check and one controlled start attempt.
Flashlight, Soft cloth for the user-accessible seal and latch area, No tool for forcing the lock
dr parts decision: None until obstruction, loading, and seal position are excluded. A latch, lock, or seal must be confirmed against the full LG model before ordering.
What not to do
- Do not slam the door or lid, force the latch, bypass the interlock, or test the lock with power connected
- Do not run an extra test cycle after the source tells you to stop or arrange service for dr
Preventive maintenance
- 1Keep the seal and latch area clean, remove trapped items before closing, and never use the door or lid to compress an oversized load
- 2If dr begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does dr identify?
LG identifies it as automatic-door motor did not reach its position.
Which action is actually supported for dr?
Keep hands clear of the automatic door mechanism and contact LG repair service for the exact model; Give service the dr photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after dr?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does dr prove which part failed?
No. It identifies “automatic-door motor did not reach its position”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The dr photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.