LG · Refrigerator · Fault guide

LG Refrigerator IS / 1S error

ErrorIS / 1S

IS / 1S is identified by LG support as ice-maker fan or ice-maker sensor connection problem. Follow the official, model-scoped checks and service boundary below.

Quick answer

What IS / 1S means

LG Refrigerator IS / 1S: ice-maker fan or ice-maker sensor connection problem. This interpretation applies to LG refrigerator models covered by the linked US refrigerator error-code article in United States / English.

Model scope
LG refrigerator models covered by the linked US refrigerator error-code article
Region
United States / English
Verified
✓

Primary evidence: LG USA refrigerator error-code list.

Open official source ↗
✓
What the code means

ice-maker fan or ice-maker sensor connection problem

Isolate the appliance when safe. Do not remove the ice-maker fan or sensor; contact LG repair service for the exact model. Do not open fixed panels or test live circuits.

Typical symptoms

01IS / 1S is shown on the LG refrigerator display, indicator, or connected app
02The published condition is: ice-maker fan or ice-maker sensor connection problem
03The control cannot confirm the documented measured condition or sensor reference represented by IS / 1S
04The important observation is when IS / 1S appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — ice-maker fan or ice-maker sensor connection problem
02IS / 1S identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to LG refrigerator models covered by the linked US refrigerator error-code article

Safe next steps

  1. 1
    Confirm the exact LG Refrigerator IS / 1S model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete IS / 1S display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: LG refrigerator models covered by the linked US refrigerator error-code article
  3. 3
    Confirm that the observed condition matches the published meaning: ice-maker fan or ice-maker sensor connection problem
  4. 4
    Published check — Do not remove the ice-maker fan or sensor
  5. 5
    Published check — contact LG repair service for the exact model
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that LG does not specify for IS / 1S
  8. 8
    Published check — Give service the IS / 1S photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that LG does not specify for IS / 1S

Service-safe actions

  1. 1
    Do not remove the ice-maker fan or sensor
  2. 2
    contact LG repair service for the exact model
  3. 3
    Give service the IS / 1S photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
IS / 1S cost planning: The source-listed external check costs €0. A qualified sensor-system diagnosis is generally planned within €110–€250 before any model-specific part is approved.
⏱Time for the first check
IS / 1S time plan: 10–20 minutes for the documented IS / 1S external check; allow 30–90 minutes for measured sensor, wiring, and control diagnosis.
🔧Tools
Photo of the complete IS / 1S display, Full model and serial number, The exact-model manual for the published external check, No live sensor-circuit test equipment
▣Parts or consumables
IS / 1S parts decision: IS / 1S describes ice-maker fan or ice-maker sensor connection problem; it does not prove the sensor itself has failed. A blocked path, connector, wiring, control input, or the measured condition can produce the same reported area.

What not to do

  • Do not bridge, heat, cool, wet, or electrically probe a sensor to clear IS / 1S
  • Do not replace a sensor until its circuit and the condition it measures have been checked
  • Do not run an extra test cycle after the source tells you to stop or arrange service for IS / 1S

Preventive maintenance

  • 1
    Follow the exact LG maintenance schedule for the refrigerator and keep the model, serial number, and service history available
  • 2
    If IS / 1S begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does IS / 1S identify?

LG identifies it as ice-maker fan or ice-maker sensor connection problem.

Which action is actually supported for IS / 1S?

Do not remove the ice-maker fan or sensor; contact LG repair service for the exact model; Give service the IS / 1S photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after IS / 1S?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does IS / 1S prove which part failed?

No. It identifies “ice-maker fan or ice-maker sensor connection problem”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The IS / 1S photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.