Miele · Washing machine · Fault guide

Miele Washing machine F138 error

ErrorF138

F138 is identified by Miele's official manual as water protection system activated. Follow the exact model-scoped checks and safety boundary below.

Quick answer

What F138 means

Miele Washing machine F138: water protection system activated. This interpretation applies to Miele washing-machine models covered by official operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 in United States / English.

Model scope
Miele washing-machine models covered by official operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08
Region
United States / English
Verified
✓

Primary evidence: Miele official washing-machine operating instructions.

Open official source ↗
!
Stop and make safe

water protection system activated

Isolate the appliance when safe. Close the water tap immediately and contact Miele Customer Service; do not restart the appliance until the water-protection cause has been assessed. Do not open fixed panels or test live circuits.

Typical symptoms

01F138 is shown on the Miele washing machine display, indicator, or connected app
02The published condition is: water protection system activated
03The appliance has reached the manufacturer-defined stop or service condition associated with F138
04The important observation is when F138 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — water protection system activated
02F138 defines a service boundary; the failed internal part still requires exact-model diagnosis
03Model boundary — apply this interpretation only to Miele washing-machine models covered by official operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08

Safe next steps

  1. 1
    Confirm the exact Miele Washing machine F138 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F138 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Miele washing-machine models covered by official operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08
  3. 3
    Confirm that the observed condition matches the published meaning: water protection system activated
  4. 4
    Published check — Close the water tap immediately and contact Miele Customer Service
  5. 5
    Published check — do not restart the appliance until the water-protection cause has been assessed
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Miele does not specify for F138
  8. 8
    Published check — Give service the F138 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F138

Service-safe actions

  1. 1
    Close the water tap immediately and contact Miele Customer Service
  2. 2
    do not restart the appliance until the water-protection cause has been assessed
  3. 3
    Give service the F138 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F138 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If F138 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Miele pricing.
⏱Time for the first check
F138 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
F138 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Miele model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F138

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    If F138 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F138 identify?

Miele identifies it as water protection system activated.

Which action is actually supported for F138?

Close the water tap immediately and contact Miele Customer Service; do not restart the appliance until the water-protection cause has been assessed; Give service the F138 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F138?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F138 prove which part failed?

No. It identifies “water protection system activated”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F138 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.