Miele Washing machine F373 error
F373 is identified by Miele's official manual as leak detected at the drain filter. Follow the exact model-scoped checks and safety boundary below.
What F373 means
Miele Washing machine F373: leak detected at the drain filter. This interpretation applies to Miele washing-machine models covered by official operating instructions 00_C7F1383898B61FD09FE58C6DD9FF8F55 in United States / English.
- Model scope
- Miele washing-machine models covered by official operating instructions 00_C7F1383898B61FD09FE58C6DD9FF8F55
- Region
- United States / English
- Verified
leak detected at the drain filter
Follow the exact model manual. Switch the appliance off, check that the drain filter is correctly seated and tighten it as the manual describes; contact Miele if F373 returns. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Miele Washing machine F373 model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete F373 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Miele washing-machine models covered by official operating instructions 00_C7F1383898B61FD09FE58C6DD9FF8F55
- 3Confirm that the observed condition matches the published meaning: leak detected at the drain filter
- 4Published check — Switch the appliance off, check that the drain filter is correctly seated and tighten it as the manual describes
- 5Published check — contact Miele if F373 returns
- 6Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
- 7if F373 remains, stop and move to exact-model diagnosis
- 8Published check — If F373 returns after the listed action, do not repeat the same correction indefinitely
- 9Published check — continue with exact-model diagnosis
- 10Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F373 remains, stop and move to exact-model diagnosis
Evidence-backed actions
- 1Switch the appliance off, check that the drain filter is correctly seated and tighten it as the manual describes
- 2contact Miele if F373 returns
- 3If F373 returns after the listed action, do not repeat the same correction indefinitely
- 4continue with exact-model diagnosis
- 5If F373 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis
Repair planning
F373 cost planning: €0 for a safe external inspection; typically €15–€80 for a confirmed external hose or seal. Internal leak diagnosis is commonly €90–€220 before parts.
F373 time plan: 5–15 minutes to shut off water and inspect externally; allow 30–90 minutes for professional leak tracing.
Dry towels and a shallow tray, Flashlight for external connections, Access to the water shut-off
F373 parts decision: No part can be selected until the leak location is found. A visibly damaged external hose or seal must match the full Miele model and connection type.
What not to do
- Do not run another cycle to reproduce an active leak, tilt the appliance, bypass a float switch, or energize wet electrical areas
- Do not turn F373 into a parts diagnosis
- the display identifies a condition, not a completed component test
- Do not turn F373 into a parts diagnosis; the display identifies a condition, not a completed component test
Preventive maintenance
- 1Keep user-accessible filters, seals, hoses, and drain connections clean and inspect them periodically for damage or seepage
- 2If F373 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does F373 identify?
Miele identifies it as leak detected at the drain filter.
Which action is actually supported for F373?
Switch the appliance off, check that the drain filter is correctly seated and tighten it as the manual describes; contact Miele if F373 returns; If F373 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.
What result matters after the F373 check?
Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.
Does F373 prove which part failed?
No. It identifies “leak detected at the drain filter”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The F373 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.