Shark Robot vacuum 1167 error
1167 is identified by Shark support as the base greywater pump is not operating normally. Follow the official, model-scoped checks and service boundary below.
What 1167 means
Shark Robot vacuum 1167: the base greywater pump is not operating normally. This interpretation applies to RV2800ZE, RV2800YE, and RV2800YS series models covered by the official article in United States / English.
- Model scope
- RV2800ZE, RV2800YE, and RV2800YS series models covered by the official article
- Region
- United States / English
- Verified
the base greywater pump is not operating normally
Isolate the appliance when safe. Switch the base off, empty and reseat the accessible greywater tank as directed by Shark, and arrange service if the pump error returns. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Shark Robot vacuum 1167 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete 1167 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: RV2800ZE, RV2800YE, and RV2800YS series models covered by the official article
- 3Confirm that the observed condition matches the published meaning: the base greywater pump is not operating normally
- 4Published check — Switch the base off, empty and reseat the accessible greywater tank as directed by Shark, and arrange service if the pump error returns
- 5Stop at the published service boundary after these actions
- 6do not add a restart or test cycle that Shark does not specify for 1167
- 7Published check — Give service the 1167 photo, full model and serial number, when it appeared, and the result of every published external check
- 8Stop at the published service boundary after these actions; do not add a restart or test cycle that Shark does not specify for 1167
Service-safe actions
- 1Switch the base off, empty and reseat the accessible greywater tank as directed by Shark, and arrange service if the pump error returns
- 2Give service the 1167 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
1167 cost planning: Accessible filter or blockage checks are usually €0; a confirmed hose, cap, or seal is commonly €10–€60. Internal pump-system diagnosis is generally planned within €60–€140 before parts.
1167 time plan: 15–35 minutes for safe draining and the permitted 1167 accessible checks; professional pump-system diagnosis commonly takes 30–90 minutes.
Towels, shallow tray, and gloves, Flashlight, Exact-model instructions for any user-accessible filter or pump cover, No live pump-circuit test equipment
1167 parts decision: 1167 points to the base greywater pump is not operating normally. A blockage, cover, seal, hose, pump, diverter, wiring, or control can share that fault area; order only the exact-model item confirmed after the accessible path is checked.
What not to do
- Do not force a pump cover, reach into a powered pump, tip an appliance containing water, or order a pump from 1167 alone
- Do not run an extra test cycle after the source tells you to stop or arrange service for 1167
Preventive maintenance
- 1Follow the exact Shark maintenance schedule for the robot vacuum and keep the model, serial number, and service history available
- 2If 1167 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does 1167 identify?
Shark identifies it as the base greywater pump is not operating normally.
Which action is actually supported for 1167?
Switch the base off, empty and reseat the accessible greywater tank as directed by Shark, and arrange service if the pump error returns; Give service the 1167 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after 1167?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does 1167 prove which part failed?
No. It identifies “the base greywater pump is not operating normally”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The 1167 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.