Shark Robot vacuum 43 error
43 is identified by Shark support as the base refill pump has detected an overcurrent condition. Follow the official, model-scoped checks and service boundary below.
What 43 means
Shark Robot vacuum 43: the base refill pump has detected an overcurrent condition. This interpretation applies to RV2700 Series Shark Stratos NEVERTOUCH robot-vacuum models covered by the official article in United States / English.
- Model scope
- RV2700 Series Shark Stratos NEVERTOUCH robot-vacuum models covered by the official article
- Region
- United States / English
- Verified
the base refill pump has detected an overcurrent condition
Isolate the appliance when safe. Switch the base off, check the accessible clean-water tank and refill path for correct seating, and contact Shark if the refill-pump error returns. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Shark Robot vacuum 43 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete 43 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: RV2700 Series Shark Stratos NEVERTOUCH robot-vacuum models covered by the official article
- 3Confirm that the observed condition matches the published meaning: the base refill pump has detected an overcurrent condition
- 4Published check — Switch the base off, check the accessible clean-water tank and refill path for correct seating, and contact Shark if the refill-pump error returns
- 5Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
- 6if 43 remains, stop and move to exact-model diagnosis
- 7Published check — If 43 returns after the listed action, do not repeat the same correction indefinitely
- 8Published check — continue with exact-model diagnosis
- 9Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if 43 remains, stop and move to exact-model diagnosis
Service-safe actions
- 1Switch the base off, check the accessible clean-water tank and refill path for correct seating, and contact Shark if the refill-pump error returns
- 2If 43 returns after the listed action, do not repeat the same correction indefinitely
- 3continue with exact-model diagnosis
- 4If 43 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis
Repair planning
43 cost planning: Accessible filter or blockage checks are usually €0; a confirmed hose, cap, or seal is commonly €10–€60. Internal pump-system diagnosis is generally planned within €60–€140 before parts.
43 time plan: 15–35 minutes for safe draining and the permitted 43 accessible checks; professional pump-system diagnosis commonly takes 30–90 minutes.
Towels, shallow tray, and gloves, Flashlight, Exact-model instructions for any user-accessible filter or pump cover, No live pump-circuit test equipment
43 parts decision: 43 points to the base refill pump has detected an overcurrent condition. A blockage, cover, seal, hose, pump, diverter, wiring, or control can share that fault area; order only the exact-model item confirmed after the accessible path is checked.
What not to do
- Do not force a pump cover, reach into a powered pump, tip an appliance containing water, or order a pump from 43 alone
- Do not turn 43 into a parts diagnosis
- the display identifies a condition, not a completed component test
- Do not turn 43 into a parts diagnosis; the display identifies a condition, not a completed component test
Preventive maintenance
- 1Follow the exact Shark maintenance schedule for the robot vacuum and keep the model, serial number, and service history available
- 2If 43 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does 43 identify?
Shark identifies it as the base refill pump has detected an overcurrent condition.
Which action is actually supported for 43?
Switch the base off, check the accessible clean-water tank and refill path for correct seating, and contact Shark if the refill-pump error returns; If 43 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.
What result matters after the 43 check?
Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.
Does 43 prove which part failed?
No. It identifies “the base refill pump has detected an overcurrent condition”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The 43 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.