Samsung Washing machine Cb / C6 error
Cb / C6 is identified by Samsung support as the washer is in calibration mode. Follow the official, model-scoped checks and service boundary below.
What Cb / C6 means
Samsung Washing machine Cb / C6: the washer is in calibration mode. This interpretation applies to Samsung washing-machine models covered by the linked US washing-machine error-code article in United States / English.
- Model scope
- Samsung washing-machine models covered by the linked US washing-machine error-code article
- Region
- United States / English
- Verified
the washer is in calibration mode
Follow the exact model manual. Remove all laundry and follow the exact model calibration procedure; this display is not automatically a failed-part diagnosis. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Samsung Washing machine Cb / C6 model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete Cb / C6 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Samsung washing-machine models covered by the linked US washing-machine error-code article
- 3Confirm that the observed condition matches the published meaning: the washer is in calibration mode
- 4Published check — Remove all laundry and follow the exact model calibration procedure
- 5Published check — this display is not automatically a failed-part diagnosis
- 6Treat Cb / C6 as normal only while the observed operation matches “the washer is in calibration mode”
- 7a different symptom needs separate diagnosis
- 8Published check — No component repair is indicated while Cb / C6 remains the documented status “the washer is in calibration mode”
- 9Treat Cb / C6 as normal only while the observed operation matches “the washer is in calibration mode”; a different symptom needs separate diagnosis
What to do
- 1Remove all laundry and follow the exact model calibration procedure
- 2this display is not automatically a failed-part diagnosis
- 3No component repair is indicated while Cb / C6 remains the documented status “the washer is in calibration mode”
Action details
Cb / C6 cost planning: €0 for the control or setting correction. If the controls remain unresponsive afterward, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Samsung pricing.
Cb / C6 time plan: 1–5 minutes for the control sequence and one response check.
No tools required, Use the exact-model control labels shown in the official instructions
Cb / C6 parts decision: None for the published Cb / C6 control procedure.
What not to do
- Do not force a key, pry up the control panel, or repeat the key sequence rapidly if the display does not respond
- Do not order a part or interrupt normal operation solely because Cb / C6 is displayed
Preventive maintenance
- 1Learn the model's normal indicators and control-lock sequence so a status message is not mistaken for a hardware fault
- 2Record a change in behavior rather than treating the normal Cb / C6 state itself as a maintenance fault
Frequently asked questions
What exactly does Cb / C6 identify?
Samsung identifies it as the washer is in calibration mode.
Which action is actually supported for Cb / C6?
Remove all laundry and follow the exact model calibration procedure; this display is not automatically a failed-part diagnosis; No component repair is indicated while Cb / C6 remains the documented status “the washer is in calibration mode”.
What result matters after the Cb / C6 check?
Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.
Does Cb / C6 prove which part failed?
No. It identifies “the washer is in calibration mode”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The Cb / C6 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.