Samsung washer E2 / bE2 / 6E2 / BE2 / 8E2 code
ErrorE2 / bE2 / 6E2 / BE2 / 8E2
E2 / bE2 / 6E2 / BE2 / 8E2 is listed by Samsung support as jammed button error. Code variants and available checks can differ by model and region.
What the code means
Jammed button error
Disconnect power before inspecting hoses or accessible filters, keep hands away from moving parts, and follow the exact Samsung model manual.
Typical symptoms
01E2 / bE2 / 6E2 / BE2 / 8E2 appears on the display
02The current cycle may pause or stop
03The affected fill, drain, door, power, or balance function may not complete
Likely causes
Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.
01Button physically stuck or contaminated
02Control-panel or model-specific button-sensing fault
Safe next steps
- 1Power the washer off
- 2Touch each control button individually
- 3Gently work each button across its edges, then release it
- 4Power the washer back on once
- 5Arrange Samsung service if a button is damaged or the code returns
Step-by-step repair
- 1Samsung's published user check is limited to releasing a stuck button: with power off, touch each panel button one at a time and work it gently around its edges. Restore power and test once. If the code returns or a control is damaged, arrange service.
Repair details
🔧Tools
Clean, dry hands, No screwdriver or electrical tool is required for Samsung's published button check
Clean, dry hands, No screwdriver or electrical tool is required for Samsung's published button check
What not to do
- Do not spray liquid into the control panel
- Do not pry, remove, or bridge buttons
- Do not open the control panel or attempt a board repair
Preventive maintenance
- 1Keep the control panel dry
- 2Avoid pressing buttons with sharp objects or soaking-wet hands
Frequently asked questions
What does E2/bE2 mean?
Samsung identifies a panel button that is stuck or continuously pressed.
Can every BE2/8E2 be treated this way?
No. Samsung says that on some models it is a MEMS sensor error; confirm the exact model manual if the code returns.
Did this fix your appliance?
Your anonymous response helps us show which repairs work in the real world.