Vaillant · Heat pump · Fault guide

Vaillant Heat pump F.42 error

ErrorF.42

F.42 is identified by Vaillant support as coding-resistor fault. Follow the official, model-scoped checks and service boundary below.

Quick answer

What F.42 means

Vaillant Heat pump F.42: coding-resistor fault. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English.

Model scope
Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
Region
United Kingdom / English
Verified
✓

Primary evidence: Vaillant UK official heat-pump fault-code support.

Open official source ↗
✓
What the code means

coding-resistor fault

Isolate the appliance when safe. Record the code and arrange Vaillant engineer service; do not open the casing or replace the resistor or wiring yourself. Do not open fixed panels or test live circuits.

Typical symptoms

01F.42 is shown on the Vaillant heat pump display, indicator, or connected app
02The published condition is: coding-resistor fault
03The appliance has reached the manufacturer-defined stop or service condition associated with F.42
04The important observation is when F.42 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — coding-resistor fault
02F.42 defines a service boundary; the failed internal part still requires exact-model diagnosis
03Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page

Safe next steps

  1. 1
    Confirm the exact Vaillant Heat pump F.42 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F.42 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
  3. 3
    Confirm that the observed condition matches the published meaning: coding-resistor fault
  4. 4
    Published check — Record the code and arrange Vaillant engineer service
  5. 5
    Published check — do not open the casing or replace the resistor or wiring yourself
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Vaillant does not specify for F.42
  8. 8
    Published check — Give service the F.42 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Vaillant does not specify for F.42

Service-safe actions

  1. 1
    Record the code and arrange Vaillant engineer service
  2. 2
    do not open the casing or replace the resistor or wiring yourself
  3. 3
    Give service the F.42 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F.42 cost planning: The source-listed safety check is usually €0. €140–€320 is a typical Europe planning range for diagnosis before parts; it is not Vaillant pricing. Ask for separate diagnosis, parts, labor, and call-out lines on the quote.
⏱Time for the first check
F.42 time plan: 5–10 minutes to document and isolate safely; 30–90 minutes is a typical diagnostic visit before any model-specific repair.
🔧Tools
Phone camera for the complete F.42 display, Full model and serial number, Power or water isolation access as described by the official procedure
▣Parts or consumables
F.42 parts decision: No component should be ordered from F.42 alone. The documented fault area is “coding-resistor fault”; the technician must identify the failed model-specific part and revision.

What not to do

  • Do not open fixed panels, test live circuits, bypass protection, or keep operating the appliance after an urgent stop instruction
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F.42

Preventive maintenance

  • 1
    Follow the exact Vaillant maintenance schedule for the heat pump and keep the model, serial number, and service history available
  • 2
    If F.42 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F.42 identify?

Vaillant identifies it as coding-resistor fault.

Which action is actually supported for F.42?

Record the code and arrange Vaillant engineer service; do not open the casing or replace the resistor or wiring yourself; Give service the F.42 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F.42?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F.42 prove which part failed?

No. It identifies “coding-resistor fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F.42 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.