AEG · Dryer · Fault guide

AEG Dryer E45 error

ErrorE45

E45 is identified by AEG support as door-closure problem. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E45 means

AEG Dryer E45: door-closure problem. This interpretation applies to AEG tumble-dryer models covered by the linked UK support article in United Kingdom / English.

Model scope
AEG tumble-dryer models covered by the linked UK support article
Region
United Kingdom / English
Verified
✓

Primary evidence: AEG tumble-dryer E40/E45 support.

Open official source ↗
✓
What the code means

door-closure problem

Follow the exact model manual. remove laundry caught in the seal, clean the accessible seal and close the door until it latches, then arrange service if the code remains Do not open fixed panels or test live circuits.

Typical symptoms

01E45 is shown on the AEG dryer display, indicator, or connected app
02The published condition is: door-closure problem
03The appliance cannot confirm the documented door, lid, latch, or lock state
04The important observation is when E45 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — door-closure problem
02E45 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete
03Model boundary — apply this interpretation only to AEG tumble-dryer models covered by the linked UK support article

Safe next steps

  1. 1
    Confirm the exact AEG Dryer E45 model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete E45 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: AEG tumble-dryer models covered by the linked UK support article
  3. 3
    Confirm that the observed condition matches the published meaning: door-closure problem
  4. 4
    Published check — remove laundry caught in the seal, clean the accessible seal and close the door until it latches, then arrange service if the code remains
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that AEG does not specify for E45
  7. 7
    Published check — Give service the E45 photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that AEG does not specify for E45

Evidence-backed actions

  1. 1
    remove laundry caught in the seal, clean the accessible seal and close the door until it latches, then arrange service if the code remains
  2. 2
    Give service the E45 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E45 cost planning: €0 for cleaning and reseating checks; a confirmed latch or seal commonly costs €20–€100 before labor. If E45 remains, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not AEG pricing.
⏱Time for the first check
E45 time plan: 5–15 minutes for an external closure check and one controlled start attempt.
🔧Tools
Flashlight, Soft cloth for the user-accessible seal and latch area, No tool for forcing the lock
▣Parts or consumables
E45 parts decision: None until obstruction, loading, and seal position are excluded. A latch, lock, or seal must be confirmed against the full AEG model before ordering.

What not to do

  • Do not slam the door or lid, force the latch, bypass the interlock, or test the lock with power connected
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E45

Preventive maintenance

  • 1
    Keep the seal and latch area clean, remove trapped items before closing, and never use the door or lid to compress an oversized load
  • 2
    If E45 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E45 identify?

AEG identifies it as door-closure problem.

Which action is actually supported for E45?

remove laundry caught in the seal, clean the accessible seal and close the door until it latches, then arrange service if the code remains; Give service the E45 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E45?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E45 prove which part failed?

No. It identifies “door-closure problem”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E45 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.