Electrolux · Dryer · Fault guide

Electrolux Dryer ECA error

ErrorECA

ECA is identified by Electrolux support as the ProSteam water tank may be empty. Follow the official, model-scoped checks and service boundary below.

Quick answer

What ECA means

Electrolux Dryer ECA: the ProSteam water tank may be empty. This interpretation applies to Electrolux UK ProSteam tumble dryers covered by the linked ECA support article in United Kingdom / English.

Model scope
Electrolux UK ProSteam tumble dryers covered by the linked ECA support article
Region
United Kingdom / English
Verified
✓

Primary evidence: Electrolux UK ProSteam dryer ECA support.

Open official source ↗
✓
What the code means

the ProSteam water tank may be empty

Follow the exact model manual. fill the steam tank to the MAX level and arrange service if the display remains Do not open fixed panels or test live circuits.

Typical symptoms

01ECA is shown on the Electrolux dryer display, indicator, or connected app
02The published condition is: the ProSteam water tank may be empty
03The affected fill stage does not receive or confirm the expected water supply while ECA is active
04The important observation is when ECA appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the ProSteam water tank may be empty
02ECA does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed
03Model boundary — apply this interpretation only to Electrolux UK ProSteam tumble dryers covered by the linked ECA support article

Safe next steps

  1. 1
    Confirm the exact Electrolux Dryer ECA model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete ECA display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Electrolux UK ProSteam tumble dryers covered by the linked ECA support article
  3. 3
    Confirm that the observed condition matches the published meaning: the ProSteam water tank may be empty
  4. 4
    Published check — fill the steam tank to the MAX level and arrange service if the display remains
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that Electrolux does not specify for ECA
  7. 7
    Published check — Give service the ECA photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Electrolux does not specify for ECA

Evidence-backed actions

  1. 1
    fill the steam tank to the MAX level and arrange service if the display remains
  2. 2
    Give service the ECA photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
ECA cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If ECA returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Electrolux pricing.
⏱Time for the first check
ECA time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
ECA parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Electrolux model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not run an extra test cycle after the source tells you to stop or arrange service for ECA

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    If ECA begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does ECA identify?

Electrolux identifies it as the ProSteam water tank may be empty.

Which action is actually supported for ECA?

fill the steam tank to the MAX level and arrange service if the display remains; Give service the ECA photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after ECA?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does ECA prove which part failed?

No. It identifies “the ProSteam water tank may be empty”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The ECA photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.