Bosch · Dishwasher · Fault guide

Bosch Dishwasher E6103 error

ErrorE6103

E6103 is listed by Bosch support as dishwasher drainage is restricted. The exact checks and component layout can vary by model and region.

Quick answer

What E6103 means

Bosch Dishwasher E6103: Dishwasher drainage is restricted. This interpretation applies to Bosch dishwasher models covered by the linked Bosch US error-code support page in United States / English.

Model scope
Bosch dishwasher models covered by the linked Bosch US error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official dishwasher error-code support.

Open official source ↗
✓
What the code means

Dishwasher drainage is restricted

Switch the dishwasher off before cleaning user-accessible parts. Hidden glass may be present near the filter and pump cover.

Typical symptoms

01Drainage is slow or stops before the tub is empty
02Water may back up toward the filter area
03The drain hose or sink connection may be restricted

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Dishwasher drainage is restricted

Safe next steps

  1. 1
    Confirm the exact Bosch Dishwasher E6103 model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete E6103 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch US error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: Dishwasher drainage is restricted
  4. 4
    Confirm that the observed condition matches the published meaning: a blocked drain-filter condition
  5. 5
    Published check — Check the visible drain hose, filter, and pump-cover area as Bosch describes
  6. 6
    Published check — contact Bosch Customer Support if drainage remains restricted
  7. 7
    Stop at the published service boundary after these actions
  8. 8
    do not add a restart or test cycle that Bosch does not specify for E6103
  9. 9
    Published check — Give service the E6103 photo, full model and serial number, when it appeared, and the result of every published external check
  10. 10
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E6103

Evidence-backed actions

  1. 1
    Check the visible drain hose, filter, and pump-cover area as Bosch describes
  2. 2
    contact Bosch Customer Support if drainage remains restricted
  3. 3
    Give service the E6103 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E6103 cost planning: €0 for an accessible blockage check; typically €10–€45 for a confirmed hose, cap, or seal. A diagnosed pump repair commonly moves into the €90–€220 service range before parts.
⏱Time for the first check
E6103 time plan: 15–35 minutes to drain safely, inspect accessible points, refit them, and run one short drain test.
🔧Tools
Dry towels, shallow tray, and household gloves, Flashlight, A coin or hand grip only if the exact-model manual permits opening the user-accessible filter cover
▣Parts or consumables
E6103 parts decision: Usually none for clearing an accessible filter or hose. A drain pump is not confirmed by E6103; match any pump, cover, seal, or hose to the full model only after diagnosis.

What not to do

  • Do not force a jammed pump cover, tip an appliance containing water, or reach into the pump area while power is connected
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E6103

Preventive maintenance

  • 1
    Keep user-accessible filters, seals, hoses, and drain connections clean and inspect them periodically for damage or seepage
  • 2
    If E6103 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E6103 identify?

Bosch identifies it as Dishwasher drainage is restricted.

Which action is actually supported for E6103?

Check the visible drain hose, filter, and pump-cover area as Bosch describes; contact Bosch Customer Support if drainage remains restricted; Give service the E6103 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E6103?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E6103 prove which part failed?

No. It identifies “Dishwasher drainage is restricted”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E6103 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.