Bosch · Washing machine · Fault guide

Bosch Washing machine E22 / F22 error

ErrorE22 / F22

E22 / F22 is identified by Bosch support as a washing-machine temperature or control condition. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E22 / F22 means

Bosch Washing machine E22 / F22: a washing-machine temperature or control condition. This interpretation applies to Bosch washing machine models covered by the linked Bosch official error-code support page in United States / English.

Model scope
Bosch washing machine models covered by the linked Bosch official error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official home-appliance error-code support.

Open official source ↗
✓
What the code means

a washing-machine temperature or control condition

Isolate the appliance when safe. Record the model and code, isolate power when safe, and arrange Bosch service. Do not open fixed panels or test live circuits.

Typical symptoms

01E22 / F22 is shown on the Bosch washing machine display, indicator, or connected app
02The published condition is: a washing-machine temperature or control condition
03The measured temperature condition does not match the operating range represented by E22 / F22
04The important observation is when E22 / F22 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — a washing-machine temperature or control condition
02E22 / F22 identifies the temperature condition but does not alone prove a sensor, airflow, heater, refrigerant, wiring, or control fault
03Model boundary — apply this interpretation only to Bosch washing machine models covered by the linked Bosch official error-code support page

Safe next steps

  1. 1
    Confirm the exact Bosch Washing machine E22 / F22 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete E22 / F22 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch washing machine models covered by the linked Bosch official error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: a washing-machine temperature or control condition
  4. 4
    Published check — Record the model and code, isolate power when safe, and arrange Bosch service
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that Bosch does not specify for E22 / F22
  7. 7
    Published check — Give service the E22 / F22 photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E22 / F22

Service-safe actions

  1. 1
    Record the model and code, isolate power when safe, and arrange Bosch service
  2. 2
    Give service the E22 / F22 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E22 / F22 cost planning: €0 for cooldown and external checks. If E22 / F22 returns at normal conditions, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Bosch pricing.
⏱Time for the first check
E22 / F22 time plan: 15–60 minutes for safe cooldown or temperature normalization; professional electrical diagnosis usually takes 30–90 minutes.
🔧Tools
Timer, Exact-model cooldown and ventilation instructions, No live temperature-sensor or mains-voltage test equipment
▣Parts or consumables
E22 / F22 parts decision: None for cooldown or external ventilation checks. E22 / F22 may identify a temperature-related area, but it does not establish the exact sensor, heater, fan, or control part.

What not to do

  • Do not defeat thermal protection, apply external heat, test a live sensor circuit, or restart repeatedly before the appliance has cooled
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E22 / F22

Preventive maintenance

  • 1
    Follow the exact Bosch maintenance schedule for the washing machine and keep the model, serial number, and service history available
  • 2
    If E22 / F22 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E22 / F22 identify?

Bosch identifies it as a washing-machine temperature or control condition.

Which action is actually supported for E22 / F22?

Record the model and code, isolate power when safe, and arrange Bosch service; Give service the E22 / F22 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E22 / F22?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E22 / F22 prove which part failed?

No. It identifies “a washing-machine temperature or control condition”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E22 / F22 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.