Daikin Air conditioner P4 error
P4 is listed in Daikin's official, model-scoped air-conditioner fault table as inverter-circuit heat-sink temperature sensor fault.
Reference source listed as Daikin official FTX25KMV1B / FTX35KMV1B operation manual 3P393186-11R.
Open official source ↗inverter-circuit heat-sink temperature sensor fault
Stop if there is smoke, a burning smell, damaged wiring, repeated breaker operation, or refrigerant leakage. Do not probe live wiring, inverter terminals, or control boards. Record the code, switch the air conditioner off, and contact the Daikin service shop; the manual says not to repair, dismantle, reinstall, or modify the unit yourself.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Daikin Air conditioner P4 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete P4 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Daikin room air-conditioner models FTX25KMV1B and FTX35KMV1B
- 3Confirm that the observed condition matches the published meaning: inverter-circuit heat-sink temperature sensor fault
- 4Published check — Do not probe live wiring, inverter terminals, or control boards
- 5Published check — Record the code, switch the air conditioner off, and contact the Daikin service shop
- 6Published check — the manual says not to repair, dismantle, reinstall, or modify the unit yourself
- 7Stop at the published service boundary after these actions
- 8do not add a restart or test cycle that Daikin does not specify for P4
- 9Published check — Give service the P4 photo, full model and serial number, when it appeared, and the result of every published external check
- 10Stop at the published service boundary after these actions; do not add a restart or test cycle that Daikin does not specify for P4
Service-safe actions
- 1Do not probe live wiring, inverter terminals, or control boards
- 2Record the code, switch the air conditioner off, and contact the Daikin service shop
- 3the manual says not to repair, dismantle, reinstall, or modify the unit yourself
- 4Give service the P4 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
P4 cost planning: The published load, obstruction, or restart check costs €0. A drive-system diagnosis is generally planned within €140–€320 before parts, with the component and labor quoted separately.
P4 time plan: 10–20 minutes for the permitted P4 external checks and one controlled test; professional drive diagnosis commonly takes 45–90 minutes.
Phone photo of P4, Full model and serial number, Flashlight for an external stopped-appliance inspection only, No live motor or inverter test equipment
P4 parts decision: P4 identifies inverter-circuit heat-sink temperature sensor fault. It does not alone confirm a motor, inverter, belt, bearing, rotor, wiring harness, or control board; the exact failed item must be diagnosed on the listed model family.
What not to do
- Wait for all movement to stop
- Do not rotate a powered mechanism, bypass an interlock, test inverter output, or order a motor from P4 alone
- Do not run an extra test cycle after the source tells you to stop or arrange service for P4
Preventive maintenance
- 1Follow the exact Daikin maintenance schedule for the air conditioner and keep the model, serial number, and service history available
- 2If P4 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does P4 identify?
Daikin identifies it as inverter-circuit heat-sink temperature sensor fault.
Which action is actually supported for P4?
Do not probe live wiring, inverter terminals, or control boards; Record the code, switch the air conditioner off, and contact the Daikin service shop; the manual says not to repair, dismantle, reinstall, or modify the unit yourself; Give service the P4 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after P4?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does P4 prove which part failed?
No. It identifies “inverter-circuit heat-sink temperature sensor fault”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The P4 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.