Electrolux · Dishwasher · Fault guide

Electrolux Dishwasher i40 error

Errori40

i40 is identified by Electrolux support as the dishwasher filter or sump is clogged. Follow the official, model-scoped checks and service boundary below.

Quick answer

What i40 means

Electrolux Dishwasher i40: the dishwasher filter or sump is clogged. This interpretation applies to Electrolux US dishwashers covered by the linked official error-code and alarm guide in United States / English.

Model scope
Electrolux US dishwashers covered by the linked official error-code and alarm guide
Region
United States / English
Verified
✓

Primary evidence: Electrolux US dishwasher error-code and alarm guide.

Open official source ↗
✓
What the code means

the dishwasher filter or sump is clogged

Follow the exact model manual. clean the accessible glass trap and filter, then run one controlled test Do not open fixed panels or test live circuits.

Typical symptoms

01i40 is shown on the Electrolux dishwasher display, indicator, or connected app
02The published condition is: the dishwasher filter or sump is clogged
03The documented pump or circulation function does not complete as expected while i40 is active
04The important observation is when i40 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — the dishwasher filter or sump is clogged
02i40 identifies the pump or circulation path but does not alone prove the pump, obstruction, wiring, or control failed
03Model boundary — apply this interpretation only to Electrolux US dishwashers covered by the linked official error-code and alarm guide

Safe next steps

  1. 1
    Confirm the exact Electrolux Dishwasher i40 model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete i40 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Electrolux US dishwashers covered by the linked official error-code and alarm guide
  3. 3
    Confirm that the observed condition matches the published meaning: the dishwasher filter or sump is clogged
  4. 4
    Published check — clean the accessible glass trap and filter, then run one controlled test
  5. 5
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
  6. 6
    if i40 remains, stop and move to exact-model diagnosis
  7. 7
    Published check — If i40 returns after the listed action, do not repeat the same correction indefinitely
  8. 8
    Published check — continue with exact-model diagnosis
  9. 9
    Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if i40 remains, stop and move to exact-model diagnosis

Evidence-backed actions

  1. 1
    clean the accessible glass trap and filter, then run one controlled test
  2. 2
    If i40 returns after the listed action, do not repeat the same correction indefinitely
  3. 3
    continue with exact-model diagnosis
  4. 4
    If i40 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
i40 cost planning: Accessible filter or blockage checks are usually €0; a confirmed hose, cap, or seal is commonly €10–€60. Internal pump-system diagnosis is generally planned within €90–€220 before parts.
⏱Time for the first check
i40 time plan: 15–35 minutes for safe draining and the permitted i40 accessible checks; professional pump-system diagnosis commonly takes 30–90 minutes.
🔧Tools
Towels, shallow tray, and gloves, Flashlight, Exact-model instructions for any user-accessible filter or pump cover, No live pump-circuit test equipment
▣Parts or consumables
i40 parts decision: i40 points to the dishwasher filter or sump is clogged. A blockage, cover, seal, hose, pump, diverter, wiring, or control can share that fault area; order only the exact-model item confirmed after the accessible path is checked.

What not to do

  • Do not force a pump cover, reach into a powered pump, tip an appliance containing water, or order a pump from i40 alone
  • Do not turn i40 into a parts diagnosis
  • the display identifies a condition, not a completed component test
  • Do not turn i40 into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Follow the exact Electrolux maintenance schedule for the dishwasher and keep the model, serial number, and service history available
  • 2
    If i40 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does i40 identify?

Electrolux identifies it as the dishwasher filter or sump is clogged.

Which action is actually supported for i40?

clean the accessible glass trap and filter, then run one controlled test; If i40 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.

What result matters after the i40 check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does i40 prove which part failed?

No. It identifies “the dishwasher filter or sump is clogged”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The i40 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.