Gorenje dishwasher F45 error
Gorenje uses F45 for a diverter fault. The official table does not verify a user repair, so record the model and arrange service.
What F45 means
Gorenje Dishwasher F45: The dishwasher diverter has reported a fault. This interpretation applies to Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en in Europe / English manual.
- Model scope
- Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en
- Region
- Europe / English manual
- Verified
The dishwasher diverter has reported a fault
Stop the dishwasher and isolate power before any external inspection. Do not open fixed panels or force the diverter mechanism.
Typical symptoms
Likely causes
Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.
Safe next steps
- 1Confirm the exact Gorenje Dishwasher F45 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete F45 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Gorenje dishwasher model GV693C60UVAD covered by official manual 875524en
- 3Confirm that the observed condition matches the published meaning: The dishwasher diverter has reported a fault
- 4Confirm F45 and record the exact model
- 5Stop the programme and isolate power
- 6Check the spray arms for visible loading obstruction without forcing the internal mechanism
- 7Do not remove the base or diverter assembly
- 8Arrange Gorenje service if F45 remains
- 9Published check — The Gorenje table identifies F45 as a diverter fault but does not publish a user repair
- 10Published check — The safe action is an external obstruction check followed by qualified service
Service-safe actions
- 1The Gorenje table identifies F45 as a diverter fault but does not publish a user repair
- 2The safe action is an external obstruction check followed by qualified service
- 3If F45 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis
Repair planning
F45 cost planning: Accessible filter or blockage checks are usually €0; a confirmed hose, cap, or seal is commonly €10–€60. Internal pump-system diagnosis is generally planned within €90–€220 before parts.
F45 time plan: 15–35 minutes for safe draining and the permitted F45 accessible checks; professional pump-system diagnosis commonly takes 30–90 minutes.
Towels, shallow tray, and gloves, Flashlight, Exact-model instructions for any user-accessible filter or pump cover, No live pump-circuit test equipment
F45 parts decision: F45 points to The dishwasher diverter has reported a fault. A blockage, cover, seal, hose, pump, diverter, wiring, or control can share that fault area; order only the exact-model item confirmed after the accessible path is checked.
What not to do
- Do not force a pump cover, reach into a powered pump, tip an appliance containing water, or order a pump from F45 alone
- Do not force spray-arm or diverter movement, open fixed panels, bypass a position sensor, or order a diverter motor from F45 alone
- Do not turn F45 into a parts diagnosis; the display identifies a condition, not a completed component test
Preventive maintenance
- 1Follow the exact Gorenje maintenance schedule for the dishwasher and keep the model, serial number, and service history available
- 2Load tall cookware so spray arms can rotate freely and keep the model manual available for service
- 3If F45 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does F45 identify?
Gorenje identifies it as The dishwasher diverter has reported a fault.
Which action is actually supported for F45?
The Gorenje table identifies F45 as a diverter fault but does not publish a user repair; The safe action is an external obstruction check followed by qualified service.
What result matters after the F45 check?
Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.
Does F45 prove which part failed?
No. It identifies “The dishwasher diverter has reported a fault”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The F45 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.