Hotpoint Dishwasher F03 error
F03 is identified in Hotpoint's official United Kingdom appliance-specific table as a water-drain failure or timeout. Use only the published external check or service boundary below.
a water-drain failure or timeout
Follow only the official Hotpoint instructions for the linked United Kingdom appliance table. Check the drain pipe and under-sink plumbing for blockages. If F03 continues after the accessible restriction is cleared, book a Hotpoint engineer. Stop if there is water, heat, smoke, a burning smell, or unsafe electrical behavior.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Hotpoint Dishwasher F03 model and displayed code before changing settings.
- 2Complete only the user-accessible checks described in the linked official source.
- 3Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.
Step-by-step diagnosis
- 1Photograph the complete F03 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Hotpoint dishwasher models covered by the linked UK error-code table
- 3Confirm that the observed condition matches the published meaning: a water-drain failure or timeout
- 4Published check — Check the drain pipe and under-sink plumbing for blockages
- 5Published check — If F03 continues after the accessible restriction is cleared, book a Hotpoint engineer
- 6Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check
- 7if F03 remains, stop and move to exact-model diagnosis
- 8Published check — If F03 returns after the listed action, do not repeat the same correction indefinitely
- 9Published check — continue with exact-model diagnosis
- 10Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F03 remains, stop and move to exact-model diagnosis
Evidence-backed actions
- 1Check the drain pipe and under-sink plumbing for blockages
- 2If F03 continues after the accessible restriction is cleared, book a Hotpoint engineer
- 3If F03 returns after the listed action, do not repeat the same correction indefinitely
- 4continue with exact-model diagnosis
- 5If F03 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis
Repair planning
F03 cost planning: €0 for an accessible blockage check; typically €10–€45 for a confirmed hose, cap, or seal. A diagnosed pump repair commonly moves into the €90–€220 service range before parts.
F03 time plan: 15–35 minutes to drain safely, inspect accessible points, refit them, and run one short drain test.
Dry towels, shallow tray, and household gloves, Flashlight, A coin or hand grip only if the exact-model manual permits opening the user-accessible filter cover
F03 parts decision: Usually none for clearing an accessible filter or hose. A drain pump is not confirmed by F03; match any pump, cover, seal, or hose to the full model only after diagnosis.
What not to do
- Do not force a jammed pump cover, tip an appliance containing water, or reach into the pump area while power is connected
- Do not turn F03 into a parts diagnosis
- the display identifies a condition, not a completed component test
- Do not turn F03 into a parts diagnosis; the display identifies a condition, not a completed component test
Preventive maintenance
- 1Keep user-accessible filters, seals, hoses, and drain connections clean and inspect them periodically for damage or seepage
- 2If F03 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does F03 identify?
Hotpoint identifies it as a water-drain failure or timeout.
Which action is actually supported for F03?
Check the drain pipe and under-sink plumbing for blockages; If F03 continues after the accessible restriction is cleared, book a Hotpoint engineer; If F03 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis.
What result matters after the F03 check?
Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.
Does F03 prove which part failed?
No. It identifies “a water-drain failure or timeout”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The F03 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.