LG · Refrigerator · Fault guide

LG Refrigerator 33 error

Error33

33 is identified by LG support as compressor-relay problem. Follow the official, model-scoped checks and service boundary below.

Quick answer

What 33 means

LG Refrigerator 33: compressor-relay problem. This interpretation applies to LG refrigerator models covered by the linked US refrigerator error-code article in United States / English.

Model scope
LG refrigerator models covered by the linked US refrigerator error-code article
Region
United States / English
Verified
✓

Primary evidence: LG USA refrigerator error-code list.

Open official source ↗
✓
What the code means

compressor-relay problem

Isolate the appliance when safe. Keep the refrigerator operating only if it is otherwise safe, do not test the relay, and contact LG repair service for diagnosis. Do not open fixed panels or test live circuits.

Typical symptoms

0133 is shown on the LG refrigerator display, indicator, or connected app
02The published condition is: compressor-relay problem
03The requested heating function is stopped or limited while the documented heating-system condition is active
04The important observation is when 33 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — compressor-relay problem
0233 identifies a heating-system condition but does not alone prove the heater, relay, sensor, circulation path, wiring, or control failed
03Model boundary — apply this interpretation only to LG refrigerator models covered by the linked US refrigerator error-code article

Safe next steps

  1. 1
    Confirm the exact LG Refrigerator 33 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete 33 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: LG refrigerator models covered by the linked US refrigerator error-code article
  3. 3
    Confirm that the observed condition matches the published meaning: compressor-relay problem
  4. 4
    Published check — Keep the refrigerator operating only if it is otherwise safe, do not test the relay, and contact LG repair service for diagnosis
  5. 5
    Stop at the published service boundary after these actions
  6. 6
    do not add a restart or test cycle that LG does not specify for 33
  7. 7
    Published check — Give service the 33 photo, full model and serial number, when it appeared, and the result of every published external check
  8. 8
    Stop at the published service boundary after these actions; do not add a restart or test cycle that LG does not specify for 33

Service-safe actions

  1. 1
    Keep the refrigerator operating only if it is otherwise safe, do not test the relay, and contact LG repair service for diagnosis
  2. 2
    Give service the 33 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
33 cost planning: The published isolation or cooldown check costs €0. A qualified heating-system diagnosis is generally planned within €110–€250 before parts; request separate heater, sensor, wiring, labor, and call-out lines.
⏱Time for the first check
33 time plan: 5–15 minutes for the 33 safety check, plus any documented cooldown; a qualified heating-system diagnosis commonly takes 30–90 minutes before repair.
🔧Tools
Phone photo of 33, Full model and serial number, Timer for the one permitted cooldown or test interval, No live heater-circuit test equipment
▣Parts or consumables
33 parts decision: 33 points to compressor-relay problem, but it does not prove whether the heater, relay, sensor, wiring, circulation system, or control is responsible. Order only the exact-model part confirmed by diagnosis.

What not to do

  • Do not repeat heating cycles, bypass thermal protection, test a live heater or relay, or order a heater from 33 alone
  • Do not run an extra test cycle after the source tells you to stop or arrange service for 33

Preventive maintenance

  • 1
    Follow the exact LG maintenance schedule for the refrigerator and keep the model, serial number, and service history available
  • 2
    If 33 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does 33 identify?

LG identifies it as compressor-relay problem.

Which action is actually supported for 33?

Keep the refrigerator operating only if it is otherwise safe, do not test the relay, and contact LG repair service for diagnosis; Give service the 33 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after 33?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does 33 prove which part failed?

No. It identifies “compressor-relay problem”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The 33 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.