LG · Refrigerator · Fault guide

LG Refrigerator CL E error

ErrorCL E

CL E is identified by LG support as low-side refrigerant leak indication. Follow the official, model-scoped checks and service boundary below.

Quick answer

What CL E means

LG Refrigerator CL E: low-side refrigerant leak indication. This interpretation applies to LG refrigerator models covered by the linked US refrigerator error-code article in United States / English.

Model scope
LG refrigerator models covered by the linked US refrigerator error-code article
Region
United States / English
Verified
✓

Primary evidence: LG USA refrigerator error-code list.

Open official source ↗
!
Stop and make safe

low-side refrigerant leak indication

Isolate the appliance when safe. Stop experimenting with the sealed system and contact LG repair service; refrigerant diagnosis and repair are professional-only. Do not open fixed panels or test live circuits.

Typical symptoms

01CL E is shown on the LG refrigerator display, indicator, or connected app
02The published condition is: low-side refrigerant leak indication
03Leak protection or a water-detection condition is active; the display does not identify the leak location
04The important observation is when CL E appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — low-side refrigerant leak indication
02CL E confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak
03Model boundary — apply this interpretation only to LG refrigerator models covered by the linked US refrigerator error-code article

Safe next steps

  1. 1
    Confirm the exact LG Refrigerator CL E model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete CL E display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: LG refrigerator models covered by the linked US refrigerator error-code article
  3. 3
    Confirm that the observed condition matches the published meaning: low-side refrigerant leak indication
  4. 4
    Published check — Stop experimenting with the sealed system and contact LG repair service
  5. 5
    Published check — refrigerant diagnosis and repair are professional-only
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that LG does not specify for CL E
  8. 8
    Published check — Give service the CL E photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that LG does not specify for CL E

Service-safe actions

  1. 1
    Stop experimenting with the sealed system and contact LG repair service
  2. 2
    refrigerant diagnosis and repair are professional-only
  3. 3
    Give service the CL E photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
CL E cost planning: €0 for a safe external inspection; typically €15–€80 for a confirmed external hose or seal. Internal leak diagnosis is commonly €110–€250 before parts.
⏱Time for the first check
CL E time plan: 5–15 minutes to shut off water and inspect externally; allow 30–90 minutes for professional leak tracing.
🔧Tools
Dry towels and a shallow tray, Flashlight for external connections, Access to the water shut-off
▣Parts or consumables
CL E parts decision: No part can be selected until the leak location is found. A visibly damaged external hose or seal must match the full LG model and connection type.

What not to do

  • Do not run another cycle to reproduce an active leak, tilt the appliance, bypass a float switch, or energize wet electrical areas
  • Do not run an extra test cycle after the source tells you to stop or arrange service for CL E

Preventive maintenance

  • 1
    Keep user-accessible filters, seals, hoses, and drain connections clean and inspect them periodically for damage or seepage
  • 2
    If CL E begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does CL E identify?

LG identifies it as low-side refrigerant leak indication.

Which action is actually supported for CL E?

Stop experimenting with the sealed system and contact LG repair service; refrigerant diagnosis and repair are professional-only; Give service the CL E photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after CL E?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does CL E prove which part failed?

No. It identifies “low-side refrigerant leak indication”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The CL E photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.