LG · Washing machine · Fault guide

LG washer dE / dE1 / E01 code

ErrordE / dE1 / E01

dE / dE1 / E01 is listed by LG support as door is not closed correctly. The exact checks and component layout can vary by model and region.

Quick answer

What dE / dE1 / E01 means

LG Washing machine dE / dE1 / E01: Door is not closed correctly. This interpretation applies to LG washing-machine models listed by the linked official code table in US / English.

Model scope
LG washing-machine models listed by the linked official code table
Region
US / English
Verified
✓

Primary evidence: LG US front-load washer error codes.

Open official source ↗
✓
What the code means

Door is not closed correctly

Pause the cycle before inspection. Water may be hot; use the model manual before opening a user-accessible drain filter.

Typical symptoms

01The door is closed but the washer does not confirm that it is latched
02The cycle will not start or pauses immediately
03Laundry may be visible between the glass and rubber gasket

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01Door is not closed correctly

Safe next steps

  1. 1
    Confirm the exact LG Washing machine dE / dE1 / E01 model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete dE / dE1 / E01 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: LG washing-machine models listed by the linked official code table
  3. 3
    Confirm that the observed condition matches the published meaning: Door is not closed correctly
  4. 4
    Check for laundry caught between the door and rubber gasket
  5. 5
    Open and re-close the door
  6. 6
    If the code remains, power the washer off, unplug it or switch off its breaker, hold Start/Pause for 5 seconds, restore power, and try once
  7. 7
    Arrange LG service if the code persists
  8. 8
    Published check — Remove laundry only from the door/gasket area
  9. 9
    Published check — Close the door normally without forcing the latch
  10. 10
    Published check — Perform LG's one reset procedure

Evidence-backed actions

  1. 1
    Remove laundry only from the door/gasket area
  2. 2
    Close the door normally without forcing the latch
  3. 3
    Perform LG's one reset procedure
  4. 4
    Run one short cycle
  5. 5
    Stop and arrange service if the door will not lock or the code returns
  6. 6
    Give service the dE / dE1 / E01 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
dE / dE1 / E01 cost planning: €0 for cleaning and reseating checks; a confirmed latch or seal commonly costs €20–€100 before labor. If dE / dE1 / E01 remains, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not LG pricing.
⏱Time for the first check
dE / dE1 / E01 time plan: 5–15 minutes for an external closure check and one controlled start attempt.
🔧Tools
Flashlight, Soft cloth for the user-accessible seal and latch area, No tool for forcing the lock
▣Parts or consumables
dE / dE1 / E01 parts decision: None until obstruction, loading, and seal position are excluded. A latch, lock, or seal must be confirmed against the full LG model before ordering.

What not to do

  • Do not slam the door or lid, force the latch, bypass the interlock, or test the lock with power connected
  • Do not bypass or bridge the door lock
  • Do not force a bent or damaged latch
  • Do not run the washer with a door that will not close securely
  • Do not run an extra test cycle after the source tells you to stop or arrange service for dE / dE1 / E01

Preventive maintenance

  • 1
    Keep the seal and latch area clean, remove trapped items before closing, and never use the door or lid to compress an oversized load
  • 2
    Check the gasket area for trapped laundry before every cycle
  • 3
    If dE / dE1 / E01 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does dE / dE1 / E01 identify?

LG identifies it as Door is not closed correctly.

Which action is actually supported for dE / dE1 / E01?

Remove laundry only from the door/gasket area; Close the door normally without forcing the latch; Perform LG's one reset procedure; Run one short cycle; Stop and arrange service if the door will not lock or the code returns.

Can I run another test after dE / dE1 / E01?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does dE / dE1 / E01 prove which part failed?

No. It identifies “Door is not closed correctly”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The dE / dE1 / E01 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.