Miele Dishwasher F404 / F405 error
F404 / F405 is identified by Miele's official manual as water-inlet fault after repeated failed intake checks. Follow the exact model-scoped checks and safety boundary below.
What F404 / F405 means
Miele Dishwasher F404 / F405: water-inlet fault after repeated failed intake checks. This interpretation applies to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 in United Kingdom / English.
- Model scope
- Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38
- Region
- United Kingdom / English
- Verified
Primary evidence: Miele official commercial dishwasher operating instructions PFD 402-407.
Open official source ↗water-inlet fault after repeated failed intake checks
Isolate the appliance when safe. Open the stopcock fully, switch the dishwasher off and back on, select the programme again, and press Start/Stop once. If the fault returns, contact Miele Customer Service. Do not open fixed panels or test live circuits.
Typical symptoms
Fault area and what the code does not prove
Separate the manufacturer-defined condition from components that still need exact-model diagnosis.
Safe next steps
- 1Confirm the exact Miele Dishwasher F404 / F405 model and displayed code before taking action.
- 2Keep the appliance in a safe state and use only the external checks named in the official source.
- 3If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.
Step-by-step diagnosis
- 1Photograph the complete F404 / F405 display before changing controls or removing power
- 2Confirm that the full model number is covered by this scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38
- 3Confirm that the observed condition matches the published meaning: water-inlet fault after repeated failed intake checks
- 4Published check — Open the stopcock fully, switch the dishwasher off and back on, select the programme again, and press Start/Stop once
- 5Published check — If the fault returns, contact Miele Customer Service
- 6Stop at the published service boundary after these actions
- 7do not add a restart or test cycle that Miele does not specify for F404 / F405
- 8Published check — Give service the F404 / F405 photo, full model and serial number, when it appeared, and the result of every published external check
- 9Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F404 / F405
Service-safe actions
- 1Open the stopcock fully, switch the dishwasher off and back on, select the programme again, and press Start/Stop once
- 2If the fault returns, contact Miele Customer Service
- 3Give service the F404 / F405 photo, full model and serial number, when it appeared, and the result of every published external check
Repair planning
F404 / F405 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If F404 / F405 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Miele pricing.
F404 / F405 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
F404 / F405 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Miele model specification confirms the correct hose.
What not to do
- Close the water valves before disconnecting a hose
- Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
- Do not run an extra test cycle after the source tells you to stop or arrange service for F404 / F405
Preventive maintenance
- 1Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
- 2If F404 / F405 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis
Frequently asked questions
What exactly does F404 / F405 identify?
Miele identifies it as water-inlet fault after repeated failed intake checks.
Which action is actually supported for F404 / F405?
Open the stopcock fully, switch the dishwasher off and back on, select the programme again, and press Start/Stop once; If the fault returns, contact Miele Customer Service; Give service the F404 / F405 photo, full model and serial number, when it appeared, and the result of every published external check.
Can I run another test after F404 / F405?
Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.
Does F404 / F405 prove which part failed?
No. It identifies “water-inlet fault after repeated failed intake checks”; parts are selected only after the exact model and failed function are confirmed.
What information should accompany a service request?
The F404 / F405 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.
Did this guide fix your appliance?
Your anonymous response helps us show which repairs work in the real world. One current response is kept per guide.