Miele · Dishwasher · Fault guide

Miele Dishwasher F413 / F414 error

ErrorF413 / F414

F413 / F414 is identified by Miele's official manual as water-inlet fault caused by flow pressure that is too high. Follow the exact model-scoped checks and safety boundary below.

Quick answer

What F413 / F414 means

Miele Dishwasher F413 / F414: water-inlet fault caused by flow pressure that is too high. This interpretation applies to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 in United Kingdom / English.

Model scope
Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38
Region
United Kingdom / English
Verified
✓

Primary evidence: Miele official commercial dishwasher operating instructions PFD 402-407.

Open official source ↗
✓
What the code means

water-inlet fault caused by flow pressure that is too high

Isolate the appliance when safe. Stop using the dishwasher and have the water connection and flow pressure checked against the manual's technical data. Contact Miele Customer Service for advice. Do not open fixed panels or test live circuits.

Typical symptoms

01F413 / F414 is shown on the Miele dishwasher display, indicator, or connected app
02The published condition is: water-inlet fault caused by flow pressure that is too high
03The affected fill stage does not receive or confirm the expected water supply while F413 / F414 is active
04The important observation is when F413 / F414 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — water-inlet fault caused by flow pressure that is too high
02F413 / F414 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed
03Model boundary — apply this interpretation only to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38

Safe next steps

  1. 1
    Confirm the exact Miele Dishwasher F413 / F414 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F413 / F414 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38
  3. 3
    Confirm that the observed condition matches the published meaning: water-inlet fault caused by flow pressure that is too high
  4. 4
    Published check — Stop using the dishwasher and have the water connection and flow pressure checked against the manual's technical data
  5. 5
    Published check — Contact Miele Customer Service for advice
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Miele does not specify for F413 / F414
  8. 8
    Published check — Give service the F413 / F414 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F413 / F414

Service-safe actions

  1. 1
    Stop using the dishwasher and have the water connection and flow pressure checked against the manual's technical data
  2. 2
    Contact Miele Customer Service for advice
  3. 3
    Give service the F413 / F414 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F413 / F414 cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If F413 / F414 returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Miele pricing.
⏱Time for the first check
F413 / F414 time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
F413 / F414 parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Miele model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F413 / F414

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    If F413 / F414 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F413 / F414 identify?

Miele identifies it as water-inlet fault caused by flow pressure that is too high.

Which action is actually supported for F413 / F414?

Stop using the dishwasher and have the water connection and flow pressure checked against the manual's technical data; Contact Miele Customer Service for advice; Give service the F413 / F414 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F413 / F414?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F413 / F414 prove which part failed?

No. It identifies “water-inlet fault caused by flow pressure that is too high”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F413 / F414 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.