Miele · Washing machine · Fault guide

Miele Washing machine F35 error

ErrorF35

F35 is identified by Miele's official manual as door lock has jammed. Follow the exact model-scoped checks and safety boundary below.

Quick answer

What F35 means

Miele Washing machine F35: door lock has jammed. This interpretation applies to Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 in Australia / New Zealand / English.

Model scope
Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08
Region
Australia / New Zealand / English
Verified
✓

Primary evidence: Miele official washing-machine operating instructions.

Open official source ↗
✓
What the code means

door lock has jammed

Isolate the appliance when safe. Do not work on live or pressurised systems.

Typical symptoms

01F35 is shown on the Miele washing machine display, indicator, or connected app
02The published condition is: door lock has jammed
03The appliance cannot confirm the documented door, lid, latch, or lock state
04The important observation is when F35 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — door lock has jammed
02F35 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete
03Model boundary — apply this interpretation only to Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08

Safe next steps

  1. 1
    Confirm the exact Miele Washing machine F35 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F35 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08
  3. 3
    Confirm that the observed condition matches the published meaning: door lock has jammed
  4. 4
    Published check — Switch the washing machine off and on once
  5. 5
    Published check — If F35 returns, contact Miele Customer Service and do not force the door
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Miele does not specify for F35
  8. 8
    Published check — Give service the F35 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F35

Service-safe actions

  1. 1
    Switch the washing machine off and on once
  2. 2
    If F35 returns, contact Miele Customer Service and do not force the door
  3. 3
    Give service the F35 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F35 cost planning: €0 for cleaning and reseating checks; a confirmed latch or seal commonly costs €20–€100 before labor. If F35 remains, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Miele pricing.
⏱Time for the first check
F35 time plan: 5–15 minutes for an external closure check and one controlled start attempt.
🔧Tools
Flashlight, Soft cloth for the user-accessible seal and latch area, No tool for forcing the lock
▣Parts or consumables
F35 parts decision: None until obstruction, loading, and seal position are excluded. A latch, lock, or seal must be confirmed against the full Miele model before ordering.

What not to do

  • Do not slam the door or lid, force the latch, bypass the interlock, or test the lock with power connected
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F35

Preventive maintenance

  • 1
    Keep the seal and latch area clean, remove trapped items before closing, and never use the door or lid to compress an oversized load
  • 2
    If F35 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F35 identify?

Miele identifies it as door lock has jammed.

Which action is actually supported for F35?

Switch the washing machine off and on once; If F35 returns, contact Miele Customer Service and do not force the door; Give service the F35 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F35?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F35 prove which part failed?

No. It identifies “door lock has jammed”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F35 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.