Samsung · Dishwasher · Fault guide

Samsung dishwasher 4C / 4E error

Error4C / 4E

Samsung identifies 4C and 4E as water-supply errors. Check the supply shut-off, temperature, pressure, and visible hose path before service.

Quick answer

What 4C / 4E means

Samsung Dishwasher 4C / 4E: The dishwasher is not receiving water at the required pressure or temperature. This interpretation applies to Samsung US dishwasher models covered by the linked official error-code guidance in United States / English.

Model scope
Samsung US dishwasher models covered by the linked official error-code guidance
Region
United States / English
Verified
✓

Primary evidence: Samsung US dishwasher error-code support.

Open official source ↗
✓
What the code means

The dishwasher is not receiving water at the required pressure or temperature

Close the water shut-off before moving or disconnecting a supply line. Stop immediately if a connection leaks; do not work on live electrical parts.

Typical symptoms

014C or 4E appears during filling
02The dishwasher does not receive enough water to start or continue
03A kinked supply line or unsuitable household supply may be present

Likely causes

Start with the least invasive explanation and stop if the check requires internal electrical or sealed-system access.

01The water supply is closed or restricted
02Supply pressure or temperature is outside Samsung's stated range
03A visible supply line or connection problem

Safe next steps

  1. 1
    Confirm the exact Samsung Dishwasher 4C / 4E model and displayed code before changing settings.
  2. 2
    Complete only the user-accessible checks described in the linked official source.
  3. 3
    Run one controlled test after the check; if the code returns, stop and use the model manual or qualified service.

Step-by-step diagnosis

  1. 1
    Photograph the complete 4C / 4E display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Samsung US dishwasher models covered by the linked official error-code guidance
  3. 3
    Confirm that the observed condition matches the published meaning: The dishwasher is not receiving water at the required pressure or temperature
  4. 4
    Turn the dishwasher off and close the water shut-off before touching the supply path
  5. 5
    Confirm the shut-off valve is fully open
  6. 6
    Inspect the visible supply line for kinks, crushing, or leaks
  7. 7
    Check that hot-water supply is within Samsung's stated 120–149°F range and household pressure is 20–120 psi when those checks are safely available
  8. 8
    Restore the supply and run one short fill test
  9. 9
    request service if 4C/4E returns
  10. 10
    Published check — Open the shut-off valve, correct only a visible hose restriction, and stop if the supply line or connection leaks

Evidence-backed actions

  1. 1
    Open the shut-off valve, correct only a visible hose restriction, and stop if the supply line or connection leaks
  2. 2
    Do not select an inlet valve or internal part from 4C/4E alone
  3. 3
    use Samsung service if the household supply is suitable and the code returns
  4. 4
    If 4C / 4E returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis

Repair planning

€Cost for the first check
4C / 4E cost planning: €0 to open valves, straighten hoses, or clean an accessible screen; typically €15–€60 for a confirmed replacement inlet hose. If 4C / 4E returns with normal supply, €90–€220 is a typical Europe planning range for diagnosis before parts; it is not Samsung pricing.
⏱Time for the first check
4C / 4E time plan: 10–25 minutes for supply, hose, and accessible-screen checks plus one short fill test.
🔧Tools
Dry towels and a shallow tray, Soft brush for a user-accessible inlet screen only, Hand access to the household water valves
▣Parts or consumables
4C / 4E parts decision: Usually none for the first check. Replace an inlet hose only if it is visibly damaged and the exact Samsung model specification confirms the correct hose.

What not to do

  • Close the water valves before disconnecting a hose
  • Do not probe the inlet valve electrically or run repeated fill tests if a connection leaks
  • Do not disconnect a pressurized or hot supply line, work on live wiring, or exceed the temperature and pressure limits in Samsung's guidance
  • Do not turn 4C / 4E into a parts diagnosis; the display identifies a condition, not a completed component test

Preventive maintenance

  • 1
    Keep inlet hoses unkinked, close household valves before hose work, and clean only user-accessible inlet screens at the exact-model interval
  • 2
    Keep the shut-off accessible and inspect the supply connection for leaks after installation or movement
  • 3
    If 4C / 4E begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does 4C / 4E identify?

Samsung identifies it as The dishwasher is not receiving water at the required pressure or temperature.

Which action is actually supported for 4C / 4E?

Open the shut-off valve, correct only a visible hose restriction, and stop if the supply line or connection leaks; Do not select an inlet valve or internal part from 4C/4E alone; use Samsung service if the household supply is suitable and the code returns.

What result matters after the 4C / 4E check?

Whether the documented condition clears after the listed action. If it remains or returns, the exact model needs further diagnosis.

Does 4C / 4E prove which part failed?

No. It identifies “The dishwasher is not receiving water at the required pressure or temperature”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The 4C / 4E photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.