Vaillant · Heat pump · Fault guide

Vaillant Heat pump F.752 error

ErrorF.752

F.752 is identified by Vaillant support as frequency-converter or inverter-board fault. Follow the official, model-scoped checks and service boundary below.

Quick answer

What F.752 means

Vaillant Heat pump F.752: frequency-converter or inverter-board fault. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English.

Model scope
Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
Region
United Kingdom / English
Verified
✓

Primary evidence: Vaillant UK official heat-pump fault-code support.

Open official source ↗
!
Stop and make safe

frequency-converter or inverter-board fault

Isolate the appliance when safe. Contact a qualified heating installer or Vaillant engineer to check the electrical supply and inverter system; do not open the electrical cabinet. Do not open fixed panels or test live circuits.

Typical symptoms

01F.752 is shown on the Vaillant heat pump display, indicator, or connected app
02The published condition is: frequency-converter or inverter-board fault
03The affected motor, drive, or movement function is stopped or limited while F.752 is active
04The important observation is when F.752 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — frequency-converter or inverter-board fault
02F.752 identifies a drive condition but does not alone prove the motor, inverter, belt, bearing, rotor, wiring, or control failed
03Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page

Safe next steps

  1. 1
    Confirm the exact Vaillant Heat pump F.752 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F.752 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
  3. 3
    Confirm that the observed condition matches the published meaning: frequency-converter or inverter-board fault
  4. 4
    Published check — Contact a qualified heating installer or Vaillant engineer to check the electrical supply and inverter system
  5. 5
    Published check — do not open the electrical cabinet
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Vaillant does not specify for F.752
  8. 8
    Published check — Give service the F.752 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Vaillant does not specify for F.752

Service-safe actions

  1. 1
    Contact a qualified heating installer or Vaillant engineer to check the electrical supply and inverter system
  2. 2
    do not open the electrical cabinet
  3. 3
    Give service the F.752 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F.752 cost planning: The published load, obstruction, or restart check costs €0. A drive-system diagnosis is generally planned within €140–€320 before parts, with the component and labor quoted separately.
⏱Time for the first check
F.752 time plan: 10–20 minutes for the permitted F.752 external checks and one controlled test; professional drive diagnosis commonly takes 45–90 minutes.
🔧Tools
Phone photo of F.752, Full model and serial number, Flashlight for an external stopped-appliance inspection only, No live motor or inverter test equipment
▣Parts or consumables
F.752 parts decision: F.752 identifies frequency-converter or inverter-board fault. It does not alone confirm a motor, inverter, belt, bearing, rotor, wiring harness, or control board; the exact failed item must be diagnosed on the listed model family.

What not to do

  • Wait for all movement to stop
  • Do not rotate a powered mechanism, bypass an interlock, test inverter output, or order a motor from F.752 alone
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F.752

Preventive maintenance

  • 1
    Follow the exact Vaillant maintenance schedule for the heat pump and keep the model, serial number, and service history available
  • 2
    If F.752 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F.752 identify?

Vaillant identifies it as frequency-converter or inverter-board fault.

Which action is actually supported for F.752?

Contact a qualified heating installer or Vaillant engineer to check the electrical supply and inverter system; do not open the electrical cabinet; Give service the F.752 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F.752?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F.752 prove which part failed?

No. It identifies “frequency-converter or inverter-board fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F.752 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.