Vaillant · Heat pump · Fault guide

Vaillant Heat pump F.817 error

ErrorF.817

F.817 is identified by Vaillant support as inverter-board mains-voltage fault. Follow the official, model-scoped checks and service boundary below.

Quick answer

What F.817 means

Vaillant Heat pump F.817: inverter-board mains-voltage fault. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English.

Model scope
Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
Region
United Kingdom / English
Verified
✓

Primary evidence: Vaillant UK official heat-pump fault-code support.

Open official source ↗
!
Stop and make safe

inverter-board mains-voltage fault

Isolate the appliance when safe. Contact a qualified heating installer or Vaillant engineer to check supply voltage, phases, polarity, earthing, and the inverter; do not test live power. Do not open fixed panels or test live circuits.

Typical symptoms

01F.817 is shown on the Vaillant heat pump display, indicator, or connected app
02The published condition is: inverter-board mains-voltage fault
03The appliance reports the documented supply, interruption, wiring, or power-restoration condition
04The important observation is when F.817 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — inverter-board mains-voltage fault
02F.817 does not alone locate the fault in the outlet, breaker, cord, installation wiring, appliance wiring, or control
03Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page

Safe next steps

  1. 1
    Confirm the exact Vaillant Heat pump F.817 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F.817 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
  3. 3
    Confirm that the observed condition matches the published meaning: inverter-board mains-voltage fault
  4. 4
    Published check — Contact a qualified heating installer or Vaillant engineer to check supply voltage, phases, polarity, earthing, and the inverter
  5. 5
    Published check — do not test live power
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Vaillant does not specify for F.817
  8. 8
    Published check — Give service the F.817 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Vaillant does not specify for F.817

Service-safe actions

  1. 1
    Contact a qualified heating installer or Vaillant engineer to check supply voltage, phases, polarity, earthing, and the inverter
  2. 2
    do not test live power
  3. 3
    Give service the F.817 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F.817 cost planning: €0 for the published breaker, plug, or power-restoration check. If the household supply or appliance wiring needs diagnosis, €140–€320 is a typical Europe planning range for diagnosis before parts; it is not Vaillant pricing.
⏱Time for the first check
F.817 time plan: 5–15 minutes to document F.817 and complete the published power check; allow 30–90 minutes for a qualified supply or appliance diagnosis.
🔧Tools
Phone photo of the complete F.817 display, Full model and serial number, Access to the household breaker or plug only as the official instructions permit, No live-voltage test equipment for an owner check
▣Parts or consumables
F.817 parts decision: F.817 documents inverter-board mains-voltage fault. It does not by itself distinguish the appliance, cord, outlet, breaker, or installation wiring as the failed item; a qualified electrical check must locate the fault before parts are ordered.

What not to do

  • Do not use an extension lead, bypass a tripping breaker, open a plug or control enclosure, or measure live mains voltage
  • Stop immediately if F.817 follows heat, arcing, smoke, or a burning smell
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F.817

Preventive maintenance

  • 1
    Follow the exact Vaillant maintenance schedule for the heat pump and keep the model, serial number, and service history available
  • 2
    If F.817 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F.817 identify?

Vaillant identifies it as inverter-board mains-voltage fault.

Which action is actually supported for F.817?

Contact a qualified heating installer or Vaillant engineer to check supply voltage, phases, polarity, earthing, and the inverter; do not test live power; Give service the F.817 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F.817?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F.817 prove which part failed?

No. It identifies “inverter-board mains-voltage fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F.817 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.