Vaillant · Heat pump · Fault guide

Vaillant Heat pump F.788 error

ErrorF.788

F.788 is identified by Vaillant support as building-circuit pump fault. Follow the official, model-scoped checks and service boundary below.

Quick answer

What F.788 means

Vaillant Heat pump F.788: building-circuit pump fault. This interpretation applies to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page in United Kingdom / English.

Model scope
Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
Region
United Kingdom / English
Verified
✓

Primary evidence: Vaillant UK official heat-pump fault-code support.

Open official source ↗
!
Stop and make safe

building-circuit pump fault

Isolate the appliance when safe. Contact the heating installer or Vaillant engineer for pump, air, filter, and flow diagnosis; do not open the pump or electrical system. Do not open fixed panels or test live circuits.

Typical symptoms

01F.788 is shown on the Vaillant heat pump display, indicator, or connected app
02The published condition is: building-circuit pump fault
03The documented pump or circulation function does not complete as expected while F.788 is active
04The important observation is when F.788 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — building-circuit pump fault
02F.788 identifies the pump or circulation path but does not alone prove the pump, obstruction, wiring, or control failed
03Model boundary — apply this interpretation only to Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page

Safe next steps

  1. 1
    Confirm the exact Vaillant Heat pump F.788 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete F.788 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Vaillant heat-pump models covered by the linked official UK heat-pump fault-code page
  3. 3
    Confirm that the observed condition matches the published meaning: building-circuit pump fault
  4. 4
    Published check — Contact the heating installer or Vaillant engineer for pump, air, filter, and flow diagnosis
  5. 5
    Published check — do not open the pump or electrical system
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Vaillant does not specify for F.788
  8. 8
    Published check — Give service the F.788 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Vaillant does not specify for F.788

Service-safe actions

  1. 1
    Contact the heating installer or Vaillant engineer for pump, air, filter, and flow diagnosis
  2. 2
    do not open the pump or electrical system
  3. 3
    Give service the F.788 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
F.788 cost planning: Accessible filter or blockage checks are usually €0; a confirmed hose, cap, or seal is commonly €10–€60. Internal pump-system diagnosis is generally planned within €140–€320 before parts.
⏱Time for the first check
F.788 time plan: 15–35 minutes for safe draining and the permitted F.788 accessible checks; professional pump-system diagnosis commonly takes 30–90 minutes.
🔧Tools
Towels, shallow tray, and gloves, Flashlight, Exact-model instructions for any user-accessible filter or pump cover, No live pump-circuit test equipment
▣Parts or consumables
F.788 parts decision: F.788 points to building-circuit pump fault. A blockage, cover, seal, hose, pump, diverter, wiring, or control can share that fault area; order only the exact-model item confirmed after the accessible path is checked.

What not to do

  • Do not force a pump cover, reach into a powered pump, tip an appliance containing water, or order a pump from F.788 alone
  • Do not run an extra test cycle after the source tells you to stop or arrange service for F.788

Preventive maintenance

  • 1
    Follow the exact Vaillant maintenance schedule for the heat pump and keep the model, serial number, and service history available
  • 2
    If F.788 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does F.788 identify?

Vaillant identifies it as building-circuit pump fault.

Which action is actually supported for F.788?

Contact the heating installer or Vaillant engineer for pump, air, filter, and flow diagnosis; do not open the pump or electrical system; Give service the F.788 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after F.788?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does F.788 prove which part failed?

No. It identifies “building-circuit pump fault”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The F.788 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.