Bosch · Dishwasher · Fault guide

Bosch Dishwasher E02 error

ErrorE02

E02 is identified by Bosch support as a dishwasher temperature-sensor condition. Follow the official, model-scoped checks and service boundary below.

Quick answer

What E02 means

Bosch Dishwasher E02: a dishwasher temperature-sensor condition. This interpretation applies to Bosch dishwasher models covered by the linked Bosch official error-code support page in United States / English.

Model scope
Bosch dishwasher models covered by the linked Bosch official error-code support page
Region
United States / English
Verified
✓

Primary evidence: Bosch US official home-appliance error-code support.

Open official source ↗
✓
What the code means

a dishwasher temperature-sensor condition

Isolate the appliance when safe. Do not test the heater or sensor circuit; isolate the appliance when safe and arrange Bosch service if E02 returns. Do not open fixed panels or test live circuits.

Typical symptoms

01E02 is shown on the Bosch dishwasher display, indicator, or connected app
02The published condition is: a dishwasher temperature-sensor condition
03The control cannot confirm the documented measured condition or sensor reference represented by E02
04The important observation is when E02 appears and whether the exact published action changes that condition

Fault area and what the code does not prove

Separate the manufacturer-defined condition from components that still need exact-model diagnosis.

01Manufacturer-defined fault area — a dishwasher temperature-sensor condition
02E02 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed
03Model boundary — apply this interpretation only to Bosch dishwasher models covered by the linked Bosch official error-code support page

Safe next steps

  1. 1
    Confirm the exact Bosch Dishwasher E02 model and displayed code before taking action.
  2. 2
    Keep the appliance in a safe state and use only the external checks named in the official source.
  3. 3
    If the condition remains, stop and arrange qualified service; do not open panels or bypass a safety device.

Step-by-step diagnosis

  1. 1
    Photograph the complete E02 display before changing controls or removing power
  2. 2
    Confirm that the full model number is covered by this scope: Bosch dishwasher models covered by the linked Bosch official error-code support page
  3. 3
    Confirm that the observed condition matches the published meaning: a dishwasher temperature-sensor condition
  4. 4
    Published check — Do not test the heater or sensor circuit
  5. 5
    Published check — isolate the appliance when safe and arrange Bosch service if E02 returns
  6. 6
    Stop at the published service boundary after these actions
  7. 7
    do not add a restart or test cycle that Bosch does not specify for E02
  8. 8
    Published check — Give service the E02 photo, full model and serial number, when it appeared, and the result of every published external check
  9. 9
    Stop at the published service boundary after these actions; do not add a restart or test cycle that Bosch does not specify for E02

Service-safe actions

  1. 1
    Do not test the heater or sensor circuit
  2. 2
    isolate the appliance when safe and arrange Bosch service if E02 returns
  3. 3
    Give service the E02 photo, full model and serial number, when it appeared, and the result of every published external check

Repair planning

€Cost for the first check
E02 cost planning: The published isolation or cooldown check costs €0. A qualified heating-system diagnosis is generally planned within €90–€220 before parts; request separate heater, sensor, wiring, labor, and call-out lines.
⏱Time for the first check
E02 time plan: 5–15 minutes for the E02 safety check, plus any documented cooldown; a qualified heating-system diagnosis commonly takes 30–90 minutes before repair.
🔧Tools
Phone photo of E02, Full model and serial number, Timer for the one permitted cooldown or test interval, No live heater-circuit test equipment
▣Parts or consumables
E02 parts decision: E02 points to a dishwasher temperature-sensor condition, but it does not prove whether the heater, relay, sensor, wiring, circulation system, or control is responsible. Order only the exact-model part confirmed by diagnosis.

What not to do

  • Do not repeat heating cycles, bypass thermal protection, test a live heater or relay, or order a heater from E02 alone
  • Do not run an extra test cycle after the source tells you to stop or arrange service for E02

Preventive maintenance

  • 1
    Follow the exact Bosch maintenance schedule for the dishwasher and keep the model, serial number, and service history available
  • 2
    If E02 begins recurring despite the documented maintenance, stop repeating the same action and request exact-model diagnosis

Frequently asked questions

What exactly does E02 identify?

Bosch identifies it as a dishwasher temperature-sensor condition.

Which action is actually supported for E02?

Do not test the heater or sensor circuit; isolate the appliance when safe and arrange Bosch service if E02 returns; Give service the E02 photo, full model and serial number, when it appeared, and the result of every published external check.

Can I run another test after E02?

Not unless the official procedure above explicitly includes it. Complete the safe external actions, then keep the appliance stopped at the service boundary.

Does E02 prove which part failed?

No. It identifies “a dishwasher temperature-sensor condition”; parts are selected only after the exact model and failed function are confirmed.

What information should accompany a service request?

The E02 photo, full model and serial number, the operating stage when it appeared, and the result of each published check.

Related faults

Compare related codes for the same appliance or manufacturer before replacing parts.